company tower banner

Rovene

Mallard Creek Polymers Brand

Supplier:Mallard Creek Polymers

Products:60

View All Rovene Products

Glass Transition Temperature (Tg):20.0 - 20.0 °C

Rovene 6026 is a styrene-acrylic emulsion polymer that can be formulated in multiple coating and paint applications. It provides a strong film at room temperature for use in low sheen interior flat wall paints. This product allows the formulator to minimize the level of coalescent. Rovene 6026 can also be used in outdoor landscaping coatings due to the adhesion characteristics and compatibility with iron oxide dispersions.

Glass Transition Temperature (Tg):-43.0 - -43.0 °C

Rovene 6502 is a high solids, acrylic emulsion designed for formulation of PSA and packaging adhesives It can be used neat or blended with a variety of polymer emulsions, dispersed tackifiers, and fillers to yield performance characteristics that meet specific requirements. Rovene 6502 may also have application in vinyl flooring adhesives due to its plasticizer migration resistance.

Chemical Family:Styrene-Butadiene Copolymer
End Uses:Primer
Compatible Substrates & Surfaces:Paper
Glass Transition Temperature (Tg):-5.0 - -5.0 °C
Features:Water Resistance, Yellowing Resistance, Improved Tear Strength, Heat Resistance

Rovene 4100 is a styrene-butadiene emulsion polymer recommended for use for boxboard coating, in some publication grade papers and in the adhesive industry. Rovene 4100 may be used in adhesive and paper coating applications where FDA clearance is needed. Regulatory Status Detailed FDA 21 CFR compliances are available upon request.

Functions:Binder & Resin
Chemical Family:Acrylics & Acrylates
Compatible Substrates & Surfaces:Concrete
Physical Form:Emulsion, Liquid
Features:Excellent Adhesion, Water Resistance, UV Resistance, Improved Flexibility

Rovene 6023 is an all acrylic emulsion suggested as a polymer modifier for hydraulic cementitious mixtures for repair, basecoats for EIFS, decorative overlays and tile grouts or mortars. Addition of 5 - 15% (d/d Portland cement) improves flexibility, strength and water resistance. Rovene 6023 in portland cement mixtures results in increased adhesion to most substrates, improved water resistance, increased flexural strength and good resistance to UV light. Rovene 6023 does not contain antifoam. The addition of an effective antifoam is generally required to avoid a high air content in the hydraulic cementitious mixture. Many antifoam products have been found effective at levels of 2.5% wet on wet by mass.

Glass Transition Temperature (Tg):-45.0 - -45.0 °C

Rovene 6104 is a very soft, film forming vehicle that provides good water and rub resistance for flexographic and gravure inks and overprint varnishes. Rovene 6104 can be used as the film forming component in overprint varnish formulations or as the sole vehicle for inks and overprint varnishes providing good gloss. The emulsion can also be used as the non-skid component in formulations. Because of the low glass transition temperature, Rovene 6104 has good adhesion to treated flexible films. Inks and overprint varnishes formulated with Rovene 6104 can be formulated with graphic arts industry standard products and additives.

Glass Transition Temperature (Tg):-3.0 - -3.0 °C

Rovene 6121 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. Rovene 6121 also exhibits excellent tensile strength and maintains elongation properties when compounded with fillers.

Functions:Binder & Resin
Chemical Family:Styrene-Butadiene Copolymer
Compatible Substrates & Surfaces:Asphalt
Physical Form:Emulsion, Liquid
Features:Improved Flexibility

Rovene 4220 is a non-carboxylated styrene-butadiene emulsion recommended for use in formulations directed at contact or cold seal applications. Rovene 4220 can also be used in architectural adhesives including many types of flooring adhesives and special contact adhesives. Rovene 4220 can be used as a polychloroprene and natural latex extender if properly formulated. When working with Rovene 4220, it is important to remember that it may be tackified, thickened and blended with other non- carboxylated and carboxylated emulsions. This flexibility allows for the formulation of a wide variety of adhesives with custom performance properties.

Functions:Binder & Resin
Chemical Family:Styrene-Butadiene Copolymer
Compatible Substrates & Surfaces:Textiles, Paper, Asphalt, Metal
Physical Form:Liquid, Emulsion

Rovene 4180 is a low VOC styrene-butadiene emulsion polymer that provides the ability to compound at high solids and in multiple application areas. It is recommended for use in automobile underbody and protective coatings, landscaping mulch coatings, paper saturation, laminations, water resistance coatings, and specialty nonwoven/textile applications.

Glass Transition Temperature (Tg):69.0 - 69.0 °C

Rovene 4111 is a high glass transition temperature styrene-butadiene emulsion designed to provide additional opacity in inks, specifically inks formulated with titanium dioxide. Rovene 4111 was designed with a specific particle size that greatly improves the spacing between titanium dioxide particles resulting in increased opacity. Additionally, using Rovene 4111 may allow a formulator to reduce the level of titanium dioxide in an ink formulation.

Glass Transition Temperature (Tg):-27.0 - -27.0 °C

Rovene 4125 is a styrene-butadiene emulsion polymer recommended for applications where a primer-sealer that provides adhesion between asphalt and other various surface treatments is needed. Rovene 4125 has been used in recreational surface applications such as tennis court and running track coatings.

Glass Transition Temperature (Tg):10.0 - 10.0 °C

Rovene 6031 is an all acrylic latex designed for low VOC interior/exterior applications where high filler loading is required as as well as applications that required bake-ability.

Glass Transition Temperature (Tg):4.0 - 4.0 °C

Rovene 4076 is a medium-firm, carboxylated styrene-butadiene emulsion recommended for use in architectural coatings and interior primers for dry wall application where low perm ratings are required. Rovene 4076 is designed to exhibit tight, continuous films providing the following performance advantages: moisture vapor barrier properties, superior cold temperature coalescence, and ASTM E-96 perm ratings of ~0.5.

Knowde Brand Summary

Identification

Carrier: Water
Chemical Family: Acetates,
Acrylics & Acrylates,
Acrylics, Acrylates & Methacrylates,
Styrene-Acrylic Copolymer,
Styrene-Butadiene Copolymer,
Vinyls, Vinylics & Vinyl Derivatives
Product Type: Digital Ink,
Varnishes
Technologies: CASE Ingredients,
Industrial Additives & Materials
Product Families: Additives
Functional Additives
Construction Chemicals
Asphalt Additives,
Cement & Concrete Additives
Resins & Binders
Acrylics,
Other Resins & Binders
Textile & Leather Chemicals
Finishing Additives & Treatments
CASE Ingredients Functions: Binder & Resin,
Grinding Aid

Features & Benefits

Labeling Claims: APEO-free,
Ammonia-Free,
Bio-based,
Low VOC

Applications & Uses

Markets: Adhesives & Sealants,
Agriculture & Feed,
Automotive & Transportation,
Building & Construction,
Consumer Goods,
Electrical & Electronics,
Industrial,
Paints & Coatings,
Personal Care,
Printing & Packaging
Applications: Agricultural Films
Mulch & Fumigation Films
Automotive
Exterior & Body
Building & Construction
Construction Adhesives,
Sealants & Caulks
Building & Construction
Architectural Coatings,
Concrete Coatings & Stains,
Decorative Paints,
Roof Coatings,
Wood Coatings & Finishes
Building Envelope & Roofing
Architectural Coatings,
EIFS & Insulation,
Waterproofing & Weatherproofing
Building Materials
Construction Adhesives,
Interior Fixtures,
Sealants & Caulks
Carpet & Upholstery
DIY & Consumer
Repair Adhesives
Decorative Materials & Finishes
Carpet,
Decorative Paints, Coatings & Stains,
Wallcoverings & Decorative Laminates
Furniture
Industrial & Assembly Adhesives
Electronics Adhesives,
Textile & Footwear Adhesives
Industrial Coatings
Industrial Coatings,
Metal Coatings
Infrastructure, Roads & Paving
Pavement, Highways, Roads & Bridges
Leather & Textiles
Textile Manufacturing
Other Adhesives & Sealants Applications
Other Paints & Coatings Applications
Packaging & Assembly
Adhesives & Sealants
Packaging & Paper
Case & Carton Sealing,
Flexible Packaging Adhesives,
Tape & Label Adhesives
Packaging Coatings
Overprint Varnishes,
Primers & Lacquers
Packaging Coatings
Overprint Varnishes,
Primers & Lacquers
Paper & Pulp
Coated Paper & Paperboard
Personal Hygiene
Wipes, Tissue & Towel
Printing & Inks
Digital Printing,
Flexography,
Gravure Printing
Specialty Coatings
Other Specialty Coatings
Tapes, Labels & Adhesives
Case & Carton Sealing,
Flexible Packaging Adhesives,
Reseal & Reclosable,
Tapes & Labels
Application Method: Air Knife Coating,
Curtain Coating,
Gravure Coating,
Rod Coating,
Spray
Compatible Substrates & Surfaces: Asphalt,
Ceramic,
Concrete,
Elastomers & Rubbers,
Fibers & Fabrics,
Glass,
Metal,
Paper,
Plastics,
Textiles,
Wood
Adhesive & Sealant Type: 2K (2 Component) Adhesive,
Contact Adhesive,
Pressure Sensitive Adhesive,
Waterborne Adhesive
Coating Type: 1K (1 component) Coating,
Barrier Coating,
Base Coat,
Primer,
Waterborne Coating
Industrial Additives End Use: Asphalt
Ink & Toner Type: Waterborne Ink