Products

Rovene 6026 is a styrene-acrylic emulsion polymer that can be formulated in multiple coating and paint applications. It provides a strong film at room temperature for use in low sheen interior flat wall paints. This product allows the formulator to minimize the level of coalescent. Rovene 6026 can also be used in outdoor landscaping coatings due to the adhesion characteristics and compatibility with iron oxide dispersions.

Rovene 4180 is a low VOC styrene-butadiene emulsion polymer that provides the ability to compound at high solids and in multiple application areas. It is recommended for use in automobile underbody and protective coatings, landscaping mulch coatings, paper saturation, laminations, water resistance coatings, and specialty nonwoven/textile applications.

Rovene 6031 is an all acrylic latex designed for low VOC interior/exterior applications where high filler loading is required as as well as applications that required bake-ability.

Rovene 6130 is a very soft, self crosslinking, carboxylated styrene-butadiene emulsion specifically designed for formulation of masking and carton sealing tape adhesives. It exhibits excellent compatibility with a wide range of dispersed tackifiers and may be combined with natural latex to give the desired balance of tack, peel and shear. Rovene 6130 had found wide use in General Purpose paper label adhesives as well as some use in investment casting.

Ecronova 6607 is a styrene-acrylic emulsion polymer that is a versatile deco paint binder featuring good adhesion, block resistance, hardness, and water and alkali resistance. These properties make Ecronova 6607 a practical multi-purpose option for gloss and matte, interior and exterior paints.

Rovene 4021 is a self-crosslinking, carboxylated styrene-butadiene emulsion that has a firm hand with outstanding strength properties. This latex is especially suited for various nonwoven, textile and performance coating applications. Rovene 4021 is an excellent binder where stiffness with toughness and water resistance is required. It also accepts high filler loads of calcium carbonate, clays and alumina trihydrate and still retains excellent tensile strength. Rovene 4021 has the ability to be crosslinked with external crosslinking agents, which will improve the solvent resistance of treated substrates. Rovene 4021 is recommended for applications in textile and needle-punch backcoatings and performance coatings. This hydrophobic emulsion is also recommended as a primary binder for industrial and household floor care and scrub pads as well as for bonding wet wipes, industrial wipes and filters. Rovene 4021 can also be utilized in performance coatings where adhesion to metal surfaces is needed.