Products

Rovene 6031 is an all acrylic latex designed for low VOC interior/exterior applications where high filler loading is required as as well as applications that required bake-ability.

Rovene 4310 is a medium soft carboxylated styrene-butadiene emulsion designed for formulation of general purpose labels and construction adhesives. It is used in the formulation of general purpose labels and construction adhesives which provide excellent adhesion to a variety of substrates. Rovene 4310 has compatibility with a wide variety of commercial tackifier resins and has excellent filler tolerance.

Tychem 68710 is an anionic, carboxylated, styrene-butadiene copolymer alkali swellable thickener. This thickener is highly efficient and works in applications including high film build coatings, water proofing membranes, and mastic adhesives. For use in water-based coatings and cementious mixtures Highly efficient allowing for lower use levels and excellent water resistance Improved sag resistance and open time in some applications Imparts a pseudoplastic “shear thinning” rheology, excellent for use in troweled applications

Rovene 4076 is a medium-firm, carboxylated styrene-butadiene emulsion recommended for use in architectural coatings and interior primers for dry wall application where low perm ratings are required. Rovene 4076 is designed to exhibit tight, continuous films providing the following performance advantages: moisture vapor barrier properties, superior cold temperature coalescence, and ASTM E-96 perm ratings of ~0.5.

Rovene 5044 is a very soft carboxylated styrene-butadiene emulsion designed for formulation of permanent label and construction adhesives. It is used in the formulation of permanent label and construction adhesives which are high in peel and tack, and thus require a minimum amount of tackifier. Rovene 5044 was designed to give excellent performance and compatibility with a wide variety of tackifiers.

Rovene 403 can be used as a polymer modifier for hydraulic cementitious mixtures for repair, basecoats for EIFS, decorative overlays and tile grouts or mortars requiring low odor during application. Addition of 5 - 15% (d/d Portland cement) improves flexibility, strength and water resistance. Rovene 403 in portland cement mixtures results in increased adhesion to most substrates, improved water resistance, increased flexural strength and good resistance to UV light. Rovene 403 does not contain antifoam. The addition of an effective antifoam is generally required to avoid a high air content in the hydraulic cementitious mixture. Many antifoam products have been found effective at levels of 2.5% wet on wet by mass.

Tylac 4193 is a soft, flexible styrene-butadiene concrete modifier. It may be used at low add-on to give strength, flexibility and water/ion resistance to cementitious systems. At higher add-on levels, Tylac 4193 provides a flexible cementitious water proofing membrane.

Rovene 4176 is a medium soft, carboxylated styrene-butadiene emulsion that can be used with a variety of fillers and additives to customize the desired application properties. The dry film exhibits excellent toughness and water resistance. Rovene 4176 has found application use in carpet and cove based adhesives, as well as industrial coatings, flat architectural coatings and low moisture vapor transmission primers.

BarrierPro 4555 is a styrene-butadiene emulsion polymer of low stiffness. It dries to form a soft but tough film. Its softness makes it excellent for water proofing where films must remain flexible at below-freezing temperatures. Features: Highly stable Cured films are tough and flexible below freezing temperatures Cured films have good water resistance Hydrolysis resistant Filler compatible

Rovene 6034 is a versatile polymer that can be used in multiple paint and coatings applications. It can be formulated for interior paints, outdoor landscaping coatings, or coatings for metal.

BarrierPro 4550 is a general purpose styrene-butadiene emulsion polymer of medium stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro 4550 can be compounded with fillers and other additives to form coatings for a variety of applications such as water proofing membranes, specialty paints and sealants.

Ecronova 6607 is a styrene-acrylic emulsion polymer that is a versatile deco paint binder featuring good adhesion, block resistance, hardness, and water and alkali resistance. These properties make Ecronova 6607 a practical multi-purpose option for gloss and matte, interior and exterior paints.

BarrierPro 4551 is a carboxylated styrene-butadiene emulsion with excellent strength properties, high resistance to liquid water and water vapor, high blush resistance and excellent adhesion to multiple construction substrates. BarrierPro 4551 has excellent stability with dry-add inorganic fillers and sets quickly into a low tack, high strength, water resistant film. BarrierPro 4551 is also a good base polymer for blending with other BarrierPro products to allow a membrane to be custom tailored to a specific strength and/or flexibility need.