Products

Tykote 6160 is a flexible acrylic emulsion designed to provide a good balance of Cobb resistance, OGR, and MVTR properties from coatings made with it. Films and coatings made from Tykote 6160 also have good flexibility. Tykote 6160 demonstrates the ability to be applied via all typical methods used to apply barrier coatings, including rod, blade, and flexo or gravure presses. Request the Tykote Products for Excellence in Barrier Coatings bulletin to learn more.

Rovene 6026 is a styrene-acrylic emulsion polymer that can be formulated in multiple coating and paint applications. It provides a strong film at room temperature for use in low sheen interior flat wall paints. This product allows the formulator to minimize the level of coalescent. Rovene 6026 can also be used in outdoor landscaping coatings due to the adhesion characteristics and compatibility with iron oxide dispersions.

Rovene 6023 is an all acrylic emulsion suggested as a polymer modifier for hydraulic cementitious mixtures for repair, basecoats for EIFS, decorative overlays and tile grouts or mortars. Addition of 5 - 15% (d/d Portland cement) improves flexibility, strength and water resistance. Rovene 6023 in portland cement mixtures results in increased adhesion to most substrates, improved water resistance, increased flexural strength and good resistance to UV light. Rovene 6023 does not contain antifoam. The addition of an effective antifoam is generally required to avoid a high air content in the hydraulic cementitious mixture. Many antifoam products have been found effective at levels of 2.5% wet on wet by mass.

Rovene 6104 is a very soft, film forming vehicle that provides good water and rub resistance for flexographic and gravure inks and overprint varnishes. Rovene 6104 can be used as the film forming component in overprint varnish formulations or as the sole vehicle for inks and overprint varnishes providing good gloss. The emulsion can also be used as the non-skid component in formulations. Because of the low glass transition temperature, Rovene 6104 has good adhesion to treated flexible films. Inks and overprint varnishes formulated with Rovene 6104 can be formulated with graphic arts industry standard products and additives.

Rovene 6502 is a high solids, acrylic emulsion designed for formulation of PSA and packaging adhesives It can be used neat or blended with a variety of polymer emulsions, dispersed tackifiers, and fillers to yield performance characteristics that meet specific requirements. Rovene 6502 may also have application in vinyl flooring adhesives due to its plasticizer migration resistance.

Rovene 6031 is an all acrylic latex designed for low VOC interior/exterior applications where high filler loading is required as as well as applications that required bake-ability.

Ecronova 6630 is an ambient cure all acrylic emulsion that provides good chemical and blocking resistance, high hardness and scratch resistance as well as good wetting of wooden substrates especially for furniture and industrial coatings. This emulsion is OH-functional (1.8%) and can function both as a one or two component system and is APE free.

Rovene 6121 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. Rovene 6121 also exhibits excellent tensile strength and maintains elongation properties when compounded with fillers.

Rovene 6106 is a low viscosity but high solids letdown emulsion for paper and paper board substrates. The combination of the polymer design and high solids give inks formulated with Rovene 6106 very fast drying and excellent printability. The high solids, low viscosity, and fast drying characteristics are well suited for high speed gravure printing as well as flexographic printing.

Rovene 6001 is a very soft, all acrylic emulsion polymer specifically designed for formulation of construction adhesives. It can be used neat or blended with a wide variety of polymer emulsions, dispersed tackifiers, and fillers to yield performance characteristics that meet specific requirements. Rovene 6001 has an excellent balance of peel, tack and shear, allowing the formulation of permanent pressure sensitive adhesives.

Rovene 403 can be used as a polymer modifier for hydraulic cementitious mixtures for repair, basecoats for EIFS, decorative overlays and tile grouts or mortars requiring low odor during application. Addition of 5 - 15% (d/d Portland cement) improves flexibility, strength and water resistance. Rovene 403 in portland cement mixtures results in increased adhesion to most substrates, improved water resistance, increased flexural strength and good resistance to UV light. Rovene 403 does not contain antifoam. The addition of an effective antifoam is generally required to avoid a high air content in the hydraulic cementitious mixture. Many antifoam products have been found effective at levels of 2.5% wet on wet by mass.

Rovene 6103 is a soft, film forming vehicle that provides good water and rub resistance for flexographic and gravure inks and overprint varnishes. Rovene 6103 can be used as the film forming component in overprint varnish formulations or as the sole vehicle for inks and overprint varnishes providing excellent gloss. The emulsion can also be used as the nonskid component in formulations. Because of the low glass transition temperature, Rovene 6103 has good adhesion to treated flexible films. Inks and overprint varnishes formulated with Rovene 6103 can be formulated with graphic arts industry standard products and additives.

Rovene 6015 is a self crosslinking acrylic polymer providing a medium hand to frothed or saturated substrates. Rovene 6015 is recommended for various nonwoven and paper applications requiring medium hand with resistance to heat and light aging. Rovene 6015 also provides good wet strength and chemical resistance.

Rovene 6115 is a hard, non-film forming vehicle that is neutralized with sodium hydroxide for flexographic and gravure inks and overprint varnishes primarily for use on paper and paperboard substrates. Inks formulated with this emulsion exhibit excellent ink transfer as well as exceptional resolubility on press with low odor. Inks and overprint varnishes formulated with Rovene 6115 dry fast, clean up easily on press, and can be easily formulated with graphic arts industry standard products and additives.

Rovene 6005 is a very soft acrylic, high molecular weight latex emulsion specifically designed for formulation of pressure sensitive permanent label adhesives. Its high molecular weight allows the formulation of permanent label adhesives which are high in peel and tack, yet require a minimum amount of tackifier. Rovene 6005 was designed to give excellent performance and compatibility with a wide variety of dispersed tackifiers. Rovene 6005’s high molecular weight also provides improved wet crock of inks printed on nonwoven and textile substrates in the Printing and Packaging market.

Rovene 97982 is a very soft acrylic suggested as a base resin in flexible packaging laminating adhesives. Rovene 97982 provides excellent clarity and UV stability, high tack and peel, and medium shear. Rovene 97982 also has good adhesion to low surface energy substrates.

Rovene® 6114 is a low glass transition temperature, acrylic polymer emulsion with improved oil & grease resistance. It is a very soft film forming vehicle that provides good gloss, excellent water and rub resistance, and non-skid properties for flexographic and gravure inks and overprint varnishes. Rovene 6114 can be used as the film forming component in overprint varnishes or as the sole vehicle for inks and overprint varnishes. Because of the low glass transition temperature, Rovene 6114 has good adhesion to treated flexible films. Inks and overprint varnishes can be formulated with graphic arts standard products and additives.

Rovene 6018 is a silanated styrene-acrylic emulsion specifically designed for formulation of construction adhesives such as ceramic tile mastics and carpet adhesives. It provides excellent wet and dry adhesion to inorganic surfaces such as glass and ceramics along with outstanding filler loading capacity for economical mastic adhesive formulations. Features: Silane functionality for excellent wet and dry adhesion to inorganic substrates Can be formulated to meet ANSI 136.1 Fine particle size Excellent filler loading capability Excellent stability in highly filled systems

Rovene 6017 is recommended for bonding nonwovens where a firm, durable binder is needed such as highloft webs, interlinings, and medical applications. Rovene 6017 provides excellent dry and wet tensile strength as well as good solvent resistance. Nonwoven webs bonded with Rovene 6017 also resist yellowing at standard processing temperatures.

Rovene 6201 is an alkali soluble styrene-acrylic resin with a mid-range molecular weight supplied in a clear pellet form. Rovene 6201 is a general use resin for overprint varnishes, water based inks and pigment dispersions. Rovene 6201 provides excellent ink transfer and printability with high gloss.

Rovene® 6124 is a styrene-acrylic polymer that offers a balance of strength and flexibility with excellent water resistance. Rovene® 6124 maintains excellent tensile strength when compounded with fillers.

Rovene 6020 is a soft, carboxylated stryene-acrylic copolymer emulsion. The typical films are soft and strong with good water resistance and exhibit good resistance to discoloration. Rovene 6020 has found use in coatings for awnings, boat covers, gloss overprints for fabric, and outdoor furniture upholstery.

Ecronova® 6620 is an ambient cure acrylic polymer with excellent UV stablity that is is recommended for exterior paints and plasters with low dirt pick-up.

Rovene 6133 is a styrene-acrylic emulsion polymer designed to work in a variety of coatings applications including interior, exterior, clear or pigmented. This polymer exhibits excellent water resistance, strength, and adhesion to multiple substrates.

Rovene 6111 is a low glycol and VOC styrene-acrylic resin supported emulsion. It is a general purpose, hard, non-film forming emulsion for flexographic and gravure inks and overprint varnishes. Rovene 6111 can be used as a letdown vehicle for paper and paperboard substrates that exhibit excellent hold out and high gloss. Inks formulated witht this emulsion exhibit excellent ink transfer and resolubility on press. Inks and overprint varnishes formulated with Rovene 6111 dry fast, clean up easily on press, and can be easily formulated with graphic arts industry standard products and additives.

Rovene 6034 is a versatile polymer that can be used in multiple paint and coatings applications. It can be formulated for interior paints, outdoor landscaping coatings, or coatings for metal.

Rovene 6119 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. This polymer also exhibits excellent tensile strength and maintains elongation properties when compounded with fillers.

Ecronova 6607 is a styrene-acrylic emulsion polymer that is a versatile deco paint binder featuring good adhesion, block resistance, hardness, and water and alkali resistance. These properties make Ecronova 6607 a practical multi-purpose option for gloss and matte, interior and exterior paints.

Ecronova® 6608 is an ambient cure, pure acrylic emulsion that incorporates excellent block and alkaline resistance and extraordinary wet adhesion with minimal water absorption. The product displays early water resistance and very good weathering, as well as a non-yellowing elastic film. This emulsion shows excellent adhesion to difficult substrates such as metals and plastics. This emulsion is APEO free.

Tykote 6152 is a hard film forming styrene-acrylic emulsion designed for oil and grease resistant barrier coatings. This product also provides excellent water and blocking resistance in barrier coating compounds. Tykote 6152 also demonstrates the ability to be applied via all typical methods used to apply barrier coatings, including rod, blade, and flexo or gravure presses.

Rovene® 6120 is an all acrylic polymer that offers a balance of properties within elastomeric roof coatings. Rovene 6120 can be formulated to meet or exceed ASTM 6083, Type 1. Rovene® 6120 exhibits adhesion to substrates, balance of stength and flexibility with excellent water resistance.

Rovene 6112 is a hard, film forming, low glycol and VOC vehicle with a moderately low glass transition temperature for flexographic and gravure inks and overprint varnishes. Rovene 6112 exhibits good water and grease resistance. This polymer allows formulating for film integrity and flexibility without adversely affecting the blocking resistance of the inks and overprint varnishes. Inks and overprint varnishes formulated with Rovene 6112 can be easily formulated with graphic arts industry standard products and additives.

Rovene 6027 is an all acrylic latex that may be utilized in various applications such as trade paints, concrete coatings, and other coatings requiring exterior durability and low VOC.