Products

Rovene 4220 is a non-carboxylated styrene-butadiene emulsion recommended for use in formulations directed at contact or cold seal applications. Rovene 4220 can also be used in architectural adhesives including many types of flooring adhesives and special contact adhesives. Rovene 4220 can be used as a polychloroprene and natural latex extender if properly formulated. When working with Rovene 4220, it is important to remember that it may be tackified, thickened and blended with other non- carboxylated and carboxylated emulsions. This flexibility allows for the formulation of a wide variety of adhesives with custom performance properties.

Rovene 6502 is a high solids, acrylic emulsion designed for formulation of PSA and packaging adhesives It can be used neat or blended with a variety of polymer emulsions, dispersed tackifiers, and fillers to yield performance characteristics that meet specific requirements. Rovene 6502 may also have application in vinyl flooring adhesives due to its plasticizer migration resistance.

Rovene 4111 is a high glass transition temperature styrene-butadiene emulsion designed to provide additional opacity in inks, specifically inks formulated with titanium dioxide. Rovene 4111 was designed with a specific particle size that greatly improves the spacing between titanium dioxide particles resulting in increased opacity. Additionally, using Rovene 4111 may allow a formulator to reduce the level of titanium dioxide in an ink formulation.

Rovene 4125 is a styrene-butadiene emulsion polymer recommended for applications where a primer-sealer that provides adhesion between asphalt and other various surface treatments is needed. Rovene 4125 has been used in recreational surface applications such as tennis court and running track coatings.

Rovene 4180 is a low VOC styrene-butadiene emulsion polymer that provides the ability to compound at high solids and in multiple application areas. It is recommended for use in automobile underbody and protective coatings, landscaping mulch coatings, paper saturation, laminations, water resistance coatings, and specialty nonwoven/textile applications.

Rovene 6031 is an all acrylic latex designed for low VOC interior/exterior applications where high filler loading is required as as well as applications that required bake-ability.

Rovene 6121 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. Rovene 6121 also exhibits excellent tensile strength and maintains elongation properties when compounded with fillers.

Rovene 4310 is a medium soft carboxylated styrene-butadiene emulsion designed for formulation of general purpose labels and construction adhesives. It is used in the formulation of general purpose labels and construction adhesives which provide excellent adhesion to a variety of substrates. Rovene 4310 has compatibility with a wide variety of commercial tackifier resins and has excellent filler tolerance.

Tylac 873 is a carboxylated acrylonitrile-butadiene copolymer emulsion. Addition of 2 to 10 % (dry/dry solids) in anionic asphalt emulsions improves low temperature flexibility and reduces high temperature tack. Tylac 873 also improves strength and chemical resistance. Features Good resistance to oil, grease and solvents Compatible with anionic asphalt emulsions Broadens the temperature range where the asphalt film is flexible but not tacky Good mechanical stability Good tensile strength

Tychem 68710 is an anionic, carboxylated, styrene-butadiene copolymer alkali swellable thickener. This thickener is highly efficient and works in applications including high film build coatings, water proofing membranes, and mastic adhesives. For use in water-based coatings and cementious mixtures Highly efficient allowing for lower use levels and excellent water resistance Improved sag resistance and open time in some applications Imparts a pseudoplastic “shear thinning” rheology, excellent for use in troweled applications

Rovene 6130 is a very soft, self crosslinking, carboxylated styrene-butadiene emulsion specifically designed for formulation of masking and carton sealing tape adhesives. It exhibits excellent compatibility with a wide range of dispersed tackifiers and may be combined with natural latex to give the desired balance of tack, peel and shear. Rovene 6130 had found wide use in General Purpose paper label adhesives as well as some use in investment casting.

Rovene 8305 is a high gel content, non-carboxylated styrene-butadiene emulsion recommended for flooring adhesives. These adhesives can be formulated to require exceptional uncured shear strength, pH tolerance and water resistance. Rovene 8305 can be greatly extened with oils and fillers in high solids formulations. Compatibility with commerical tackifier resins is excellent, as is filler tolerance. Dry films offer excellent water resistance, adhesion and high shear strength.

Rovene 4076 is a medium-firm, carboxylated styrene-butadiene emulsion recommended for use in architectural coatings and interior primers for dry wall application where low perm ratings are required. Rovene 4076 is designed to exhibit tight, continuous films providing the following performance advantages: moisture vapor barrier properties, superior cold temperature coalescence, and ASTM E-96 perm ratings of ~0.5.

Rovene 5044 is a very soft carboxylated styrene-butadiene emulsion designed for formulation of permanent label and construction adhesives. It is used in the formulation of permanent label and construction adhesives which are high in peel and tack, and thus require a minimum amount of tackifier. Rovene 5044 was designed to give excellent performance and compatibility with a wide variety of tackifiers.

Rovene 6001 is a very soft, all acrylic emulsion polymer specifically designed for formulation of construction adhesives. It can be used neat or blended with a wide variety of polymer emulsions, dispersed tackifiers, and fillers to yield performance characteristics that meet specific requirements. Rovene 6001 has an excellent balance of peel, tack and shear, allowing the formulation of permanent pressure sensitive adhesives.

Rovene 6105 is a very soft carboxylated styrene-butadiene emulsion specifically designed for formulation of pressure sensitive adhesives. It can be formulated into a pressure sensitive adhesives that requires a minimum amount of tackifier. Rovene 6105 was designed to give excellent performance and compatibility with a wide variety of dispersed tackifiers.

Rovene 403 can be used as a polymer modifier for hydraulic cementitious mixtures for repair, basecoats for EIFS, decorative overlays and tile grouts or mortars requiring low odor during application. Addition of 5 - 15% (d/d Portland cement) improves flexibility, strength and water resistance. Rovene 403 in portland cement mixtures results in increased adhesion to most substrates, improved water resistance, increased flexural strength and good resistance to UV light. Rovene 403 does not contain antifoam. The addition of an effective antifoam is generally required to avoid a high air content in the hydraulic cementitious mixture. Many antifoam products have been found effective at levels of 2.5% wet on wet by mass.

Rovene 4423 is a very soft carboxylated styrene-butadiene emulsion designed for formulation of permanent label adhesives and flooring adhesives. This polymer emulsion allows for the formulation of permanent label adhesives which are high in peel and tack, yet require a minimum amount of tackifier. However, it provides good tack on its own, thus minimizing the amount of tackifer required. Rovene 4423 was designed to give excellent performance and compatibility with a wide variety of dispersed tackifiers. Rovene 4423 can also be blended with natural latex for high shear tape adhesives and for use in special contact adhesive applications.

Rovene 6018 is a silanated styrene-acrylic emulsion specifically designed for formulation of construction adhesives such as ceramic tile mastics and carpet adhesives. It provides excellent wet and dry adhesion to inorganic surfaces such as glass and ceramics along with outstanding filler loading capacity for economical mastic adhesive formulations. Features: Silane functionality for excellent wet and dry adhesion to inorganic substrates Can be formulated to meet ANSI 136.1 Fine particle size Excellent filler loading capability Excellent stability in highly filled systems

Rovene 5499 is a film forming styrene-butadiene emulsion that was developed as an ink vehicle for thermoplastic polyolefin (TPO) based wall coverings. More specifically it can be formulated for metallic ink vehicles. Rovene 5499 provides inks with excellent adhesion to TPO wall covering substrates and good alkaline resistance properties.

Tylac 4193 is a soft, flexible styrene-butadiene concrete modifier. It may be used at low add-on to give strength, flexibility and water/ion resistance to cementitious systems. At higher add-on levels, Tylac 4193 provides a flexible cementitious water proofing membrane.

Rovene 9423 is a very soft carboxylated styrene-butadiene emulsion specifically designed for formulation of pressure sensitive permanent adhesives. This polymer emulsion allows formulation of pressure sensitive adhesives which are high in peel and tack yet require a minimum mount of tackifier. Rovene 9423 can also be blended with natural latex for high shear tape adhesives. This emulsion was designed to give excellent performance and compatibility with a wide variety of dispersed tackifiers.

Rovene 4150 is a medium-firm, self-crosslinking, carboxylated styrene-butadiene emulsion. It can be formulated into carpet and flooring mastics. This versatile polymer is also used in a variety of textile and nonwoven applications. Rovene 4150 offers finished properties of high tensile strength and good water resistance.

Rovene® 6124 is a styrene-acrylic polymer that offers a balance of strength and flexibility with excellent water resistance. Rovene® 6124 maintains excellent tensile strength when compounded with fillers.

Rovene 9410 is a very soft carboxylated styrene-butadiene emulsion specifically designed for formulation of pressure sensitive adhesives. It is used in the formulation of pressure sensitive adhesives with a wide variety of tackifiers. Rovene 9410 has a unique balance of molecular weight and styrene content, which makes it ideal for blending with natural rubber and formulation of low temperature adhesives.

Rovene 4176 is a medium soft, carboxylated styrene-butadiene emulsion that can be used with a variety of fillers and additives to customize the desired application properties. The dry film exhibits excellent toughness and water resistance. Rovene 4176 has found application use in carpet and cove based adhesives, as well as industrial coatings, flat architectural coatings and low moisture vapor transmission primers.

BarrierPro 4555 is a styrene-butadiene emulsion polymer of low stiffness. It dries to form a soft but tough film. Its softness makes it excellent for water proofing where films must remain flexible at below-freezing temperatures. Features: Highly stable Cured films are tough and flexible below freezing temperatures Cured films have good water resistance Hydrolysis resistant Filler compatible

Rovene 6034 is a versatile polymer that can be used in multiple paint and coatings applications. It can be formulated for interior paints, outdoor landscaping coatings, or coatings for metal.

Rovene 6119 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. This polymer also exhibits excellent tensile strength and maintains elongation properties when compounded with fillers.

BarrierPro 4550 is a general purpose styrene-butadiene emulsion polymer of medium stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro 4550 can be compounded with fillers and other additives to form coatings for a variety of applications such as water proofing membranes, specialty paints and sealants.

Ecronova 6607 is a styrene-acrylic emulsion polymer that is a versatile deco paint binder featuring good adhesion, block resistance, hardness, and water and alkali resistance. These properties make Ecronova 6607 a practical multi-purpose option for gloss and matte, interior and exterior paints.

BarrierPro 4551 is a carboxylated styrene-butadiene emulsion with excellent strength properties, high resistance to liquid water and water vapor, high blush resistance and excellent adhesion to multiple construction substrates. BarrierPro 4551 has excellent stability with dry-add inorganic fillers and sets quickly into a low tack, high strength, water resistant film. BarrierPro 4551 is also a good base polymer for blending with other BarrierPro products to allow a membrane to be custom tailored to a specific strength and/or flexibility need.

Rovene® 6120 is an all acrylic polymer that offers a balance of properties within elastomeric roof coatings. Rovene 6120 can be formulated to meet or exceed ASTM 6083, Type 1. Rovene® 6120 exhibits adhesion to substrates, balance of stength and flexibility with excellent water resistance.

Rovene 4044 is an APEO free, very soft styrene-butadiene emulsion designed for formulation of construction adhesives. Rovene 4044 has high peel and tack, and thus requires a minimum amount of tackifier when used in formulated adhesives

Rovene 6027 is an all acrylic latex that may be utilized in various applications such as trade paints, concrete coatings, and other coatings requiring exterior durability and low VOC.