Knowde Enhanced TDS
Properties
- Mechanical Properties
- Physical Properties
- Typical Properties
- Thermal Properties
- Flammability
- Tribological Properties
Value | Units | Test Method / Conditions | |
Tensile Strength (Break) | 13.8 | MPa | ISO 527 |
Elongation (Break) | 175 | % | ISO 527 |
Hardness (Shore D) | 60 | Shore D | DIN 53505 |
Compressive Stress (1% Strain-23°C-1000hr) | 4.8 | MPa | ISO 604 |
Deformation (Under Load 100 MPa-24 HR- RT) | 4 | % | - |
Compressive Modulus Of Elasticity | 400 | - | - |
Value | Units | Test Method / Conditions | |
Specific Gravity | 2.1 | g/cm3 | ISO 1183 |
Water (Absorption At Saturation) | 0 | % | ISO 62 |
Moisture (Absorption At 23°C - 50% RH) | 0 | % | ISO 62 |
Value | Units | Test Method / Conditions | |
Bondability | Stabilized in the atmosphere at 50% RH -23 ° C - Stabilized in the atmosphere 50% RH -23 ° C. | - | - |
UV Resistance | Yes | - | - |
Value | Units | Test Method / Conditions | |
Temperature Limit Of Use | -528 | °C | - |
Thermal Conductivity (23°C) | 0.37 | °C | ISO 75 |
Coef. Of Linear Thermal Expansion (23 To 100°C) | 102 | °C | ISO 75 |
Coef. Of Linear Thermal Expansion (23°C) | 75 | W/(K*m) | DIN 52612 |
Value | Units | Test Method / Conditions | |
Flammability | V0 | - | UL 94 |
Value | Units | Test Method / Conditions | |
Static Coef. Of Friction On Polished Steel | 0.1 | abs | MPC test |
Dynamic Coef. Of Friction On Polished Steel | 0.3 | abs | MPC test |
Pv Limit Without Lubrication | 0.35 | MPa | MPC test V = 0.5 m / s MPC |
Wear Coefficient On Hardened Polished Steel | 0.13 | μm/s | test PV = 0.1 MPa * m / s |
Maximum Pressure | 6.9 | MPa | MPC test |
Regulatory & Compliance
- Food Contact Safety (FDA Compliance)
Yes (Test Method -DM 21.3.73)