RULON® LR

Properties

Physical Properties

	Value	Units	Test Method / Conditions
Specific Gravity	2.25	g/cm3	ISO 1183
Water (Absorption At Saturation)	0.015	%	ISO 62
Moisture (Absorption At 23°C - 50% RH)	0	%	ISO 62

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Strength (Break)	10.3	MPa	ISO 527
Elongation (Break)	150	%	ISO 527
Impact Strength (Notch)	320	KJ /m2	ISO 179
Hardness (Shore D)	60 - 65	Shore D	DIN 53505
Compressive Stress (1% Strain-23°C-1000hr)	3.6	MPa	ISO 604
Deformation (Under Load 100 MPa-24 HR- RT)	3	%	-
Compressive Modulus Of Elasticity	440	-	-

Typical Properties

	Value	Units	Test Method / Conditions
Bondability	Stabilized in the atmosphere at 50% RH -23 ° C - Stabilized in the atmosphere 50% RH -23 ° C.	-	-
UV Resistance	Yes	-	-

Thermal Properties

	Value	Units	Test Method / Conditions
Temperature Limit Of Use	-528	°C	-
Thermal Conductivity (23°C)	0.33	°C	ISO 75
Coef. Of Linear Thermal Expansion (23 To 100°C)	106	°C	ISO 75
Coef. Of Linear Thermal Expansion (23°C)	92	W/(K*m)	DIN 52612

Electrical Properties

	Value	Units	Test Method / Conditions
Volume Resistance	110^15	Ω	IEC 60093
Surface Resistance	min.10^13	Ω	IEC 60094
Dielectric Constant (1 MHZ)	2.5	abs	IEC 60250
Dielectric Loss Factor (1 MHZ)	0.001 - 0.004	tan	IEC 60250
Dielectric Witch (2mm)	15.7	KV/mm	IEC 60243

Flammability

	Value	Units	Test Method / Conditions
Flammability	V0	-	UL 94

Tribological Properties

	Value	Units	Test Method / Conditions
Static Coef. Of Friction On Polished Steel	0.15	abs	MPC test
Dynamic Coef. Of Friction On Polished Steel	0.25	abs	MPC test
Pv Limit Without Lubrication	0.35	MPa	MPC test V = 0.5 m / s MPC
Wear Coefficient On Hardened Polished Steel	0.05	μm/s	test PV = 0.1 MPa * m / s
Maximum Pressure	6.9	MPa	MPC test

Regulatory & Compliance

Food Contact Safety (FDA Compliance)

NO (Test Method DM 21.3.73)