Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Composite Materials Functions
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
- Materials Features
- Features
- Excellent release
- Non-silicone
- Contains no chlorinated or CFC solvents
- Low wax build-up
- Benefits
- Excellent surface finish
- No build-up on mold surfaces
- Reduced mold maintenance and down time
- Greater productivity
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Applications
- Thoroughly clean your mold with Mold Cleaner 2508 or any suitable cleaner to remove all traces of previous coating and oils.
- Heat the mold to operating temperature.
- Apply a coat of Ease Release 2831 with a spray or brush and allow to dry.
- Rub Ease Release 2831 into mold surface with a clean cloth.
- Repeat two or three times to seal the mold surface.
- Start molding and reapply a light coat of Ease Release 2831 after each molding cycle.
- Finishing
Thorough cleaning of molded parts with Isopropyl Alcohol may be required prior to staining, painting, or bonding.
Properties
- Physical Form
- Appearance
- Hazy Liquid
- Typical Properties
- Properties
Weight/Gallon 6.0 lbs Drying Rate Very Fast Flammable No Wetting Quality Excellent
| Value | Units | Test Method / Conditions | |
| Solids | 6 - 7 | % | — |
| Temperature | 71 - 93 | °C | — |
| Viscosity | Medium | — | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Safety & Health
- Warning
At temperatures above 500°F, fumes are evolved which, if inhaled, can cause flu like systems. Use with adequate ventilation.
- Caution
- Use adequate protection when handling any release solvent systems.
- Skin contact my cause dryness.
- Wear safety glasses or their equivalent to prevent eye injury.
- Avoid inhalation of excessive amount of solvent vapor.