Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
The mix ratio of ManuSpec MS2110A / MS9298B resin to hardener is 100:22 by weight and 100:27 by volume. When fully cured, the material produces a durable, resilient bond that has strong environmental resistance to strong acids, bases and aggressive solvents. ManuSpec MS2110A / MS9298B was designed primarily for composite repairs to ferrous and aluminum substrates.
Applications & Uses
- Markets
- Instructions for Use
Combine the proper proportions of resin and hardener in a clean container. Mix both components thoroughly until a uniform consistency is achieved. The work life of the mixture will vary with temperature and the quantity of material.
Caution: Mixed material evolves significant heat when quantities greater than 1 lb are mixed well, not applied, and remain in a concentrated mass.
Properties
- Appearance
- Pale Yellow (Visual), Clear (Visual)
- Component A
- Component B
- Typical Properties
- Mixed Material Properties
- Cure Schedule
Cure Schedule Option 1 Option 2 24hr at 25°C X (S) X(S) 7d at 25°C* X(U) 4hr at 66°C X(U) 2hr at 93°C X(U) *For full cure at ambient temperature, S = Supported U= Unsupported
Value | Units | Test Method / Conditions | |
Brookfield Viscosity | approx. 1,450 – 1,550 | cP | ASTM D2393 |
Density | approx. 1.15 | g/cc | ASTM D792 |
Value | Units | Test Method / Conditions | |
Brookfield Viscosity | 15 - 25 | cP | ASTM D2393 |
Density | approx. 0.95 | g/cc | ASTM D792 |
Value | Units | Test Method / Conditions | |
Compressive Modulus (4hr, 66°C) | 725.0 | ksi | ASTM D-695 |
Compressive Yield Strength (4hr, 66°C) | 13500.0 | psi | ASTM D-695 |
Hardness (4hr, 66°C) | 86.0 | Shore D | - |
Tensile Modulus (4hr, 66°C) | 450.0 | ksi | ASTM D-638 |
Tensile Strength and Percent Elongation (4hr, 66°C) | 10750.0 | psi | ASTM D-638 |
Value | Units | Test Method / Conditions | |
Brookfield Viscosity | approx. 1,200 | cP | ASTM D2393 |
Density | approx. 1.11 | g/cc | ASTM D792 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging
ManuSpec MS2110A / MS9298B is packaged in pints, quarts, gallons, pails, and drums. The hardener is packaged according to the container size of the resin.
Storage & Handling
- Pot Life (100g mass, 25°C)
- approx. 50 - 60
- Storage and Handling
The shelf life of ManuSpec MS2110A/MS9298B is 12 months at 25°C. For best results, store in original, tightly closed containers in a cool, dry place out of direct sunlight. Containers should be loosely covered during the heating process to avoid pressure buildup. Allow contents to return to room temperature before mixing resin and hardener.