Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Cure Method
- Application
- Bonding to Aluminum, Steel, Concrete, and many other metals
- Resistance to chemicals, including most acids and bases
- Machinability to a metallic finish
- Instructions for Use
Combine the proper proportions of resin and hardener in a clean container. Mix both components thoroughly until a uniform dark gray color is achieved. The work life of the mixture will vary with temperature and the quantity of material. A total mixed mass greater than 100 grams is not recommended since the mixture is very reactive, exothermic and greatly shortens the working life.
Properties
- Appearance
- Dark Gray Paste (Visual), Off White (Visual)
- Component A
- Typical Properties
- Component B
- Mixed Material Properties
- Cure Schedule
Cure Temperature (°C) Cure Time 25°C
Or
2.5hr at 25°C +4hr at 93°C16 hr
Value | Units | Test Method / Conditions | |
Density | 2.65 | g/cc | ASTM D1875-03 |
Value | Units | Test Method / Conditions | |
Compressive Strength (24hr, 25°C, 50%RH) | 15500.0 | psi | ASTM D695 |
CTE (24hr, 25°C, 50%RH) | 34.0 | ppm/°C | TMA |
Dielectric Constant (24hr, 25°C, 50%RH) | 35.0 | - | ASTM D149 |
Dielectric Strength (24hr, 25°C, 50%RH) | 30.0 | volts/mil | ASTM D149 |
Hardness (24hr, 25°C, 50%RH) | 85.0 | Shore D | - |
Lap Shear Strength (24hr, 25°C, 50%RH) | 2500.0 | psi | ASTM D1002 |
Shrinkage (24hr, 25°C, 50%RH) | 0.00152 | cm/cm | ASTM D2566 |
Thermal Conductivity (24hr, 25°C, 50%RH) | 0.00265 | cal/sec·cm·°C | ASTM C177 |
Value | Units | Test Method / Conditions | |
Density | 1.56 | g/cc | ASTM D1875-03 |
Value | Units | Test Method / Conditions | |
Density | 2.1 | g/cc | ASTM D1875-03 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging
MS7125 5minute Steel Putty is packaged in pints, quarts, gallons, pails, drums. The hardener is packaged according to the container size of the resin.
Storage & Handling
- Pot Life (20g mass, 25°C)
- 4 - 6
- Storage and Handling
The shelf life of MS7125 5minute Steel Putty is 12 months at 25°C. For best results, store in original, tightly closed containers in a cool, dry place out of direct sunlight. Containers should be loosely covered during the heating process to avoid pressure buildup. Allow contents to return to room temperature before mixing resin and hardener.