Mar-Pol ABS EX4

Identification & Functionality

Chemical Family

Acrylonitrile Butadiene Styrene (ABS),

Styrenics

Polymer Name

Acrylonitrile Butadiene Styrene (ABS)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Basic Thermoplastics

Styrenics

Processing Method

Extrusion Molding

Applications & Uses

Plastics & Elastomers Processing Methods

Extrusion

Applications

• Sheet

Properties

Flame Rating

UL 94 HB

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Modulus	2030	MPa	ASTM D638
Tensile Strength (Yield)	39	MPa	ASTM D638
Tensile Strength (Break)	28	MPa	ASTM D638
Tensile Elongation (Yield)	3.1	%	ASTM D638
Tensile Elongation (Break)	32	%	ASTM D638
Tensile Elongation (Break)	31.6	%	ASTM D638
Flexural Modulus	2100	MPa	ASTM D790
Flexural Strength	63	MPa	ASTM D790
Notched Izod Impact	410	J/m	ASTM D256
Instrumented Dart Impact	33	J	ASTM D3763
Tensile Stress (Break)	28	MPa	ASTM D638
Tensile Stress (Yield)	39	MPa	ASTM D638

Physical Properties

	Value	Units	Test Method / Conditions
Specific Gravity	1.03	g/cm³	ASTM D792
Melt Mass-Flow Rate	4	g/10 min	ASTM D1238
Density/Specific Gravity	1.03	g/cm3	ASTM D792

Thermal Properties

	Value	Units	Test Method / Conditions
Vicat Softening Temperature	106	°C	ASTM D1525
CLTE - Flow (-40 to 40°C)	0.0001	cm/cm/°C	—
CLTE - Transverse (-40 to 40°C)	0.0001	cm/cm/°C	—
Relative Thermal Index Electric	60	°C	UL 746B
Relative Thermal Index Impact	60	°C	UL 746B
Relative Thermal Index Strength	60	°C	UL 746B
Deflection Temperature (0.45 MPa, Unannealed, 3.20 mm)	93	°C	ASTM D648
Deflection Temperature (1.8 MPa, Unannealed, 3.20 mm)	80	°C	ASTM D648

Processing Information (Sheet Extrusion)

	Value	Units	Test Method / Conditions
Adapter Temperature	205 to 250	°C	—
Barrel- Zone 1 Temp	170 to 200	°C	—
Barrel- Zone 2 Temp	180 to 220	°C	—
Barrel- Zone 3 Temp	190 to 225	°C	—
Barrel- Zone 4 Temp	200 to 250	°C	—
Die Temp	205 to 250	°C	—
Drying Temperature	80 to 95	°C	—
Drying Time	4	hours	—
Roll Stack Temperature Bottom	100 to 105	°C	—
Roll Stack Temperature Middle	95 to 105	°C	—
Roll Stack Temperature Top	90 to 95	°C	—
Suggested Max Moisture	0.02	%	—

Impact Properties

	Value	Units	Test Method / Conditions
CLTE (Flow: -40 to 40°C)	0.000101	cm/cm/°C	ASTM D1525
CLTE (Transverse: -40 to 40°C)	0.000104	cm/cm/°C	ASTM D1525
Dart Impact	33	J	ASTM D3763
Deflection Temperature Under Load (0.45 MPa, Unannealed, 3.2 mm)	93	°C	ASTM D648
Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.2 mm)	80	°C	ASTM D648
Flame Rating (1.5mm)	HB	—	UL 94
Notched Izod Impact	411	J/m	ASTM D256
RTi	60	°C	UL 746
Vicat Softening Temperature	106	°C	ASTM D256

Regulatory & Compliance

Certifications & Compliance

UL 94

Packaging & Availability

Country Availability

Brazil,

Canada,

China (Mainland),

Mexico,

USA

Regional Availability

• Global

Availability

Global