Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- Improves adhesion of plaster or concrete mortar to a variety of substrates.
- Alkali is resistant to stand up to chemical attacks from cementitious and masonry materials.
- Tinted for easy visual confirmation of coverage.
- Can be applied by brush, roller, or spray for ease of use under varied jobsite conditions.
- VOC compliant for EPA and most regional jurisdictions.
Applications & Uses
- Markets
- Applications
- Interior and exterior
- Vertical and overhead
- Horizontal (interior only)
- Above grade
- Substrates
- Concrete
- Masonry
- Stucco
- Drywall and gypsum board
- Portland cement plaster
- Brown coat prior to veneer plaster
- Industries
- Commercial
- Residential
- Industrial
- Infrastructure
- How to Apply
Surface Preparation:
- Surfaces should be clean and sound and free of all bond-inhibiting contaminants.
- Concrete substrates should be fully cured.
- Point or seal all cracks or voids.
Mixing:
- Prior to use, mix at slow speed with drill and mixing paddle to ensure uniform color dispersion and to minimize air entrapment.
Application:
- Do not apply on substrates that will be exposed to water
- Apply MasterProtect P 110 by brush, roller, or spray to produce a thin, continuous film.
- Do not allow MasterProtect P 110 to puddle or accumulate in low spots.
- Allow MasterProtect P 110 to dry tack free before applying wet plaster or cements.
- Subsequent application of new plasters and cements must be performed within 72 hours of applying MasterProtect P 110, provided that the cured material is clean, dust free, and intact.
Acoustical or Interior Veneer Plaster:
- When applying 2 coats of acoustical plaster or when plastering over a scratch and brown coat, allow the base coat to completely dry prior to application of MasterProtect P 110 and finish coat.
- Clean Up
- Clean all tools and equipment with warm soapy water immediately after use.
- Cured material can be removed by mechanical means only.
- For Best Performance
- MasterProtect P 110 should not be used under constant exposure to wet conditions, such as swimming pools, decks, retaining walls, sidewalks, parking ramps, or below grade applications.
- Do not apply when temperature (substrate or ambient) is 40°F or below or is expected to fall below 40°F within 12 hours after application.
- Do not thin.
- Do not use on any exterior horizontal surface.
- Do not use over water soluble materials such as glue, calcimine, wallpaper, casein-based adhesives.
- For professional use only; not for sale to or use by the general public.
- Make certain the most current versions of product data sheet and SDS are being used.
- Proper application is the responsibility of the user.
- Field visits by Master Builders Solutions personnel are for the purpose of making technical recommendations only and not for supervising or providing quality control on the jobsite.
- Yield
200 - 300 ft² per gal(4.9 - 7.4 m² /L). Coverage will vary depending on surface texture and porosity.
- Application Temperature Range
50 - 120 °F
Properties
- Typical Properties
- VOC Content
43 g/L less water and exempt solvents.
| Value | Units | Test Method / Conditions | |
| Density | 8.9 | lbs/gal | ASTM D 1475 |
| Solids by Weight | 44.0 | % | ASTM D 5201 |
Packaging & Availability
- Packaging
- 1 gallon (3.8 L) bottles
- 5 gallon (18.9 L) pails
- 30 gallon (113.6 L) drums
Storage & Handling
- Shelf Life
12 months when properly stored.
- Storage
- Store in unopened containers in a clean, dry area between 35 - 110 °F.
- Keep from freezing