Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- Formulated without silicates or other high pH additives, CLEAN 2029 "One Step" is compatible with ultrafiltration systems and bioremediation
- An excellent choice for cabinet-style spray washers and can be used for washing steel, stainless, cast iron, titanium, and many aluminum alloys
- Hard water tolerant, it provides long bath life
- Environmental approvals are simplified because CLEAN 2029 "One Step" contains no nitrites, barium, phenols, or butyl cellosolve
- This formula has very low V.O.C. content and no SARA 313 reportable ingredients Low foaming for use in high-pressure spray washers with temperatures above 140°F (60°C)
- Additional Information
- Industrial Use Only
- Consult Master Fluid Solutions before using on any metals or applications not specifically recommended.
- This product should not be mixed with other metalworking fluids or metalworking fluid additives, except as recommended by Master Fluid Solutions, as this may reduce overall performance, result in adverse health effects, or damage the machine tool and parts. If contamination occurs, please contact Master Fluid Solutions for recommended action.
- Master STAGES™ is a trademark of Master Chemical Corporation d/b/a Master Fluid Solutions.
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Use Level
- 3.0 - 10.0 %
- Application Guidelines
- CLEAN 2029 "One-Step" is designed to be used at low concentrations:
Washer Type Percent Ratio Spray washer - light soils 3.00% (33:1) Spray washer - heavy soils 5.00% (20:1) Immersion washer 5.0%-10.0% (20:1-10:1) Ultrasonic washer 3.0%-7.0% (33:1-13:1) - This product should be heated above 140°F in spray applications to avoid foaming. Ultrasonic or agitated immersion washers can often run at room temperature. The temperature limit for this product is 180°F, unless otherwise advised by your Master Fluid Solutions representative.
- Product Applications
Applications : Corrosion inhibition, dip, dunk, immersion tanks, parts washing, and spray
Soils : Coolant residues, oils, and sulfurized oils
Metals : Cast iron, stainless steels, steels, and titanium
Industries : Automotive- Mixing Instructions
- Recommended usage concentration in water: 3.0% - 10.0%.
- To help ensure the best possible working solution, add the required amount of concentrate to the required amount of water (never the reverse) and stir until uniformly mixed.
- Recommended Metalworking Concentrations
Design concentration range : 3.0% - 10.0%
Properties
- Physical Form
- Odor
- Mild (Concentrate)
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Flash Point (Concentrate) | max. 216 | °F | ASTM D93-08 |
| pH (Concentrate as Range) | 11.3 - 11.7 | - | - |
| pH (Typical Operating as Range) | 10.0 - 11.5 | - | - |
| Coolant Refractometer Factor | 5.5 | - | - |
| V.O.C. Content | 0.0 | lbs/gal | EPA Method 24 |
| Cleaner Conductivity Factor | 0.00095 | - | - |
| Titration Factor | 1.0 | - | CL-1 Titration Kit |
| Number of Cleaner Vials | 2.0 | - | CL-1 Titration Kit |
| Cleaner Indicator A or B | A | - | CL-1 Titration Kit |
Regulatory & Compliance
- Product Compliance
CLEAN 2029 is free of 2-butoxyethanol (Butyl), barium, high pH additives, nitrites, phenols, SARA 313 listed ingredients, and silicates.
Technical Details & Test Data
- Test Data
Concentration by Conductivity
Concentration by Titration
Packaging & Availability
- Packaging Type
- Packaging
- 1-gallon jug
- 5-gallon pail
- 54-gallon drum
- 270-gallon tote