Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
When washing aluminum parts above 100°F (40°C) consider using Master STAGES™ CLEAN 2115AL
- Does not foam even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115 an excellent choice where rapid buildup of coolant carryover creates a foam problem
- Many CLEAN 2115 applications are in the range of 3,000 PSI - 10,000 PSI (20684 - 68947 kPa)
- Provides excellent short-term corrosion inhibition on most common ferrous alloys
- Extremely low carryoff keeps operating costs down
- Low foam and mist
- Very low initial odor level
- Can be used on most aluminum alloys if kept under 100°F (40°C)
- Exceptional sump life and great tramp oil rejection
- Master STAGES™ CLEAN family of advanced-technology products offer highly effective cleaning and with the same in-process "one-step" method, leave behind an effective, short-term, anticorrosive film.
- Designed for specific metals, desired length of corrosion inhibition, and applications ranging from spray, immersion, ultrasonic parts, and dip tank cleaning, Master STAGES cleaners+RP inhibitors are all highly concentrated and economical, most with low foam and very low V.O.C. content
- Additional Information
- Industrial Use Only
- Consult Master Fluid Solutions before using on any metals or applications not specifically recommended.
- This product should not be mixed with other metalworking fluids or metalworking fluid additives, except as recommended by Master Fluid Solutions, as this may reduce overall performance, result in adverse health effects, or damage the machine tool and parts. If contamination occurs, please contact Master Fluid Solutions for recommended action.
- Master STAGES™ is a trademark of Master Chemical Corporation d/b/a Master Fluid Solutions.
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Use Level
- 3.0 - 10.0 %
- Application Guidelines
- In very high-pressure spray washers (over 1,000 PSI, 6894 kPa), deburrers, or water jet cutters, typical concentrations are 3% - 5%, and operating temperatures are ambient up to 140°F (60°C).
- Foam may increase if the temperature is below 80°F (27°C) at the point of agitation.
- For best corrosion resistance on ferrous parts, concentration should be kept between 5% - 10%.
- If washing aluminum parts, keep temperatures below 100°F (40°C), concentration below 5%, and minimize exposure time.
- Product Applications
Applications : Corrosion inhibition, deburring, high-pressure spray washing, parts washing, VHP spray (very high pressure), vibratory, and water-jet cutting
Soils : Coolant residues
Metals : Cast iron, composites, magnesium, plastics, steels, and zinc
Industries : Medical- Mixing Instructions
- Recommended usage concentration in water: 3.0% - 10.0%.
- To help ensure the best possible working solution, add the required amount of concentrate to the required amount of water (never the reverse) and stir until uniformly mixed.
- Recommended Metalworking Concentrations
Design concentration range : 3.0% - 10.0%
Properties
- Physical Form
- Odor
- Mild, sweet (Concentrate)
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Flash Point (Concentrate) | max. 219 | °F | ASTM D93-08 |
| pH (Concentrate as Range) | 9.6 - 9.8 | — | — |
| pH (Typical Operating as Range) | 8.8 - 9.6 | — | — |
| Coolant Refractometer Factor | 3.2 | — | — |
| V.O.C. Content | 0 | lbs/gal | EPA Method 24 |
| Cleaner Conductivity Factor | 0.003 | — | — |
| Titration Factor | 0.19 | — | CL-1 Titration Kit |
| Number of Cleaner Vials | 2.0 | — | CL-1 Titration Kit |
| Cleaner Indicator A or B | A | — | CL-1 Titration Kit |
Regulatory & Compliance
- Product Compliance
CLEAN 2115 is free of boron, EDTA, and silicates.
Technical Details & Test Data
- Test Data
Concentration by Conductivity
Concentration by Titration
Packaging & Availability
- Packaging Type
- Packaging
- 1-gallon jug
- 5-gallon pail
- 54-gallon drum
- 270-gallon tote