Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
- Effective machine cleaner
- Great for general cleaning of loose tools and parts
- Excellent for use in ultrasonic cleaner systems and immersion washers.
- Provides up to one week or more of inprocess corrosion inhibition on ferrous parts
- Ultrasonic parts washers widely used in the medical, aerospace, automotive, mining, energy, and precision parts industries — offer results often far beyond that of traditional cleaning methods. Master STAGES specifically developed ultrasonic in-process cleaners are highly effective in removing dirt, oils, rust, bacteria, grease, drawing compounds, waxy soil, and other contaminants from a wide variety of metals.
- Whether cleaning aluminum, steels, cast iron, stainless steels, alloys, brass, bronze, copper, or magnesium, Master STAGES has the ultrasonic in-process alkaline product to get it really clean
- Offering exceptional wetting ability, reduced cycle times, longer bath life, and faster, safer precision parts cleaning, yet are environmentally friendly and free of SARA 313 reportable ingredients, Master STAGES ultrasonic cleaners are the cost-effective solution to achieving a matchless surface finish.
- Additional Information
- Industrial Use Only
- Consult Master Fluid Solutions before using on any metals or applications not specifically recommended.
- This product should not be mixed with other metalworking fluids or metalworking fluid additives, except as recommended by Master Fluid Solutions, as this may reduce overall performance, result in adverse health effects, or damage the machine tool and parts. If contamination occurs, please contact Master Fluid Solutions for recommended action.
- Master STAGES™ is a trademark of Master Chemical Corporation d/b/a Master Fluid Solutions.
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Use Level
- 3.0 - 10.0 %
- Application Guidelines
- RINSE 100 is very good for immersion washing at concentrations of 3% - 10%, and temperatures from 50°F - 135°F (10°C - 57°C).
- May be heated to near boiling, but some loss of rust inhibiting properties will result over time if you do so.
- Excellent results can be obtained by hand washing machine or hand tools at concentrations of 10%
- Product Applications
Applications : Corrosion inhibition, parts washing, and ultrasonic tanks
Soils : Chlorinated oils, coolant residues, oils, and sulfurized oils
Metals : Aluminum, aluminum alloys, brass, cast iron, copper, copper alloys, ferrous metals, lead, magnesium, nonferrous metals, steels, yellow alloys, and zinc
Industries : Aerospace, automotive, general industry, and medical- Mixing Instructions
- Recommended usage concentration in water: 1.0% - 7.0%.
- To help ensure the best possible working solution, add the required amount of concentrate to the required amount of water (never the reverse) and stir until uniformly mixed.
- Recommended Metalworking Concentrations
Design concentration range : 3.0% - 10.0%
Properties
- Physical Form
- Odor
- Mild pine (Concentrate)
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Flash Point (Concentrate) | max. 212 | °F | ASTM D92-90 |
| pH (Concentrate as Range) | 9.4 - 9.6 | — | — |
| pH (Typical Operating as Range) | 9.0 - 9.6 | — | — |
| Coolant Refractometer Factor | 1.4 | — | — |
| V.O.C. Content | 0 | lbs/gal | EPA Method 24 |
| Titration Factor | 0.18 | — | CL-1 Titration Kit |
| Number of Cleaner Vials | 1.0 | — | CL-1 Titration Kit |
| Cleaner Indicator A or B | B | — | CL-1 Titration Kit |
Regulatory & Compliance
- Product Compliance
RINSE 100 is free of boron, nitrites, NPEs, phosphate, and silicates
Technical Details & Test Data
- Test Data
Concentration by % Brix
Concentration by Titration
Packaging & Availability
- Packaging Type
- Packaging
- 1-gallon jug
- 5-gallon pail
- 54-gallon drum
- 270-gallon tote