Products

Mavcoat® CRW releases hardened concrete from all forms and formliners that yields clean, easy stripping without bugholes and stains. CRW is a concentrated product used in applications that require a stronger release agent in hard to demold situations. CRW meets California, OTC, and all other Federal VOC regulations. Mavcoat CRW will not separate, so there is no need to mix before use.

Mavcoat® CDNA is a specialized release coating for molded parts that must be free of any residue because the finished parts will be painted or bonded to after molding.

Mavcoat® BR-2 is a water-based, “super-release” required when unconventional, stronger binder systems are used. It cures on the mold surface to provide a tenacious coating that withstands heavy abrasion during the molding cycle.

Mavcoat® CRW-2 is a water-based, V.O.C. free emulsion formulated for the release of concrete, GFRC, GRC, and composite reinforced concrete from molds made of steel, polyurethane, RTV silicone, rubber, epoxy, and fiberglass. Mavcoat® CRW-2 will not separate, so no mixing before use is needed.

Mavcoat® BR is a water-based emulsion used to release rubber mats and all other parts made from recycled crumb rubber using urethane binder systems. Emulsion concentrate is usually diluted with water at varying levels to achieve the release needed for a given binder system. It prevents binder from building up on mold surface and keeps tooling clean to yield longer production runs between cleaning cycles.

Mavcoat® TPC-1 is a versatile coating designed to release all injection molded thermoplastic resins. It produces a very low coefficient of static friction so parts release easily. It resists film buildup, eliminates knit lines, and yields multiple releases with a single application. TPC-1 is food grade and meets FDA regulation 21 CFR181.28 as a release agent.

Mavcoat® BR-1 is a ready-to-use, water-based coating that requires no dilution. It releases pMDI and MDI binder systems. It adheres strongly to the mold surface and does not transfer. pMDI is an unconventional adhesive, which is sometimes more difficult to release than traditional binders. It has also been known to build up more quickly on mold surfaces. BR-1 yields an anti-stick coating that mitigates this build-up.

Mavcoat® Mold Saver deposits a protective coating on mold surfaces that stops corrosion and oxidation, seals out condensation and displaces moisture. It neutralizes fingerprints and corrosive acidic deposits and will not bleed out and mark parts during production.