Products

ELASTOSIL® R 863/65 MH is a peroxide-curing silicone rubber known for its exceptional green strength, which greatly improves calendering and extrusion performance. When uncured, the extruded hoses made from this silicone rubber exhibit high dimensional stability and a non-sticky surface. ELASTOSIL® R 863/65 is specifically formulated as a high green-strength peroxide-curing silicone rubber. It is recommended to add heat stabilizers when operating at service temperatures exceeding 180 °C.

ELASTOSIL® R 416/70 MH is a peroxide-curing, high-consistency silicone rubber with very high green strength, which enhances calendaring and extrusion performance significantly. Uncured extruded hoses show high dimension stability and a non-sticky surface. The addition of heat stabilizers at service temperatures of more than 180°C is recommended.

ELASTOSIL® R 760/70 MH is a peroxide-curing, high-consistency silicone rubber with very high green strength, which enhances calendaring and extrusion performance significantly. Uncured extruded hoses show high dimension stability and a non-sticky surface. The addition of heat stabilizers at service temperatures of more than 180°C is recommended.

GENIOPLAST® PP50S12 MG is a pelletized masterbatch formulation. It contains 50% of a non-reactive, ultra-high molecular weight silicone gum dispersed in polypropylene homopolymer. This formulation is specifically developed as an additive to enhance scratch resistance in polypropylene-based compounds for automotive interior applications.

GENIOPLAST® PP50S12 is a pelletized masterbatch formulation comprising 50% of a non-reactive, ultra-high molecular weight silicone gum dispersed in polypropylene homopolymer. It is specially designed as an additive to enhance scratch resistance in polypropylene-based compounds used in automotive interior applications.

EcoPaXX® Q150-D is a long aliphatic polyamide that offers low moisture uptake, good dimensional stability, and excellent retention of properties. It belongs to the family of long-chain polyamides, which provide exceptional performance in demanding environments. It has excellent chemical resistance, low moisture absorption, a very high melting point, and a high crystallization rate. It has the lowest carbon footprint among common polyamides. The material can be processed using injection molding technology and meets the requirements for food contact quality. It is available in both low viscosity and medium-viscosity grades.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50LM is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 25N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 250NJ is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50HK(KN) is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 100N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 21GS is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50MW is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 25MW is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 40N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 200NJ is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 12N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® PFA P-62XP (perfluoroalkoxy) is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. Fluon® PFA P-62XP has chemical, electrical, and thermal properties almost identical to its close chemical cousin, polytetrafluoroethylene (PTFE), yet can be processed by conventional extrusion, injection molding, blow molding, and transfer molding techniques. This unique material can be used over a wide range of temperatures (-200°C to 260°C). It is available as a 1/8 inch pellet.

AGC Chemicals Americas, Inc. Fluon+™ FL1680 lubricant is a white, finely divided, low molecular weight powder manufactured from virgin PTFE feedstock. It has an average particle size of 11 microns, a narrow particle size distribution and low surface area. FL1680 is virtually immune from chemical attack, is water repellent, has good electrical insulation properties, a wide working temperature range and has excellent weathering and aging characteristics.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-2300N is a melt-processable copolymer of tetrafluoroethylene and ethylene. It offers a unique combination of properties such as enhanced resistance to heat and chemical attack, and exceptional physical toughness. Rotational molding and lining grades are formulated as free-flowing powders with specific particle morphologies to uniformly coat complex and challenging parts. It is used in rotational lining of components in the Chemical Process Industry (CPI) for fluid handling such as valves, pumps, pipes, fittings, tanks, and other intricate parts.

AGC Chemicals Americas, Inc. Fluon® PFA P-66P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used for extrusion, transfer, compression, and injection molding, and offers the best resistance to stress cracking among the PFA materials.

AGC Chemicals Americas, Inc. Fluon® PFA P-65P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used for general-purpose extrusion and injection molding and offers better stress crack resistance compared to P-63P.

AGC Chemicals Americas, Inc. Fluon® PFA P-63P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used in general purpose extrusion and injection molding.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-730A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-730A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications.

AGC Chemicals Americas, Inc. Fluon® ETFE LM2300K is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher heat and chemical attack resistance and outstanding physical toughness. Its rotational molding and lining grades are designed to be free-flowing powders with particle morphologies necessary to uniformly coat the most challenging and complex parts.

AGC Chemicals Americas, Inc. Fluon® ETFE TL-081 is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and high fluidity. Various powder grades are available for different processing methods and application needs.

AGC Chemicals Americas, Inc. Fluon® ETFE TL-584 is a melt-processable copolymer of tetrafluoroethylene and ethylene that boasts a unique combination of desirable properties, including higher resistance to heat and chemical attack, as well as outstanding physical toughness. Rotational molding and lining grades of Fluon® ETFE TL-584 are designed to be free-flowing powders with the necessary particle morphologies to uniformly coat even the most challenging and complex parts.

AGC Chemicals Americas, Inc. Fluon® ETFE ZH-885B is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as hard coat, applied through electrostatic coating method.

AGC Chemicals Americas, Inc. Fluon® ETFE TL-581 is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and high fluidity. Various powder grades are available for different processing methods and application needs.

AGC Chemicals Americas, Inc. Fluon+™ LM-ETFE LH-8000 is a new addition to the LM-ETFE AH Series. This ETFE (tetrafluoroethylene-ethylene copolymer) has a functional group polymerized directly in to the chain backbone, allowing it to adhere to other materials. This resin is ideal for producing multi-layer structures in a one-step process without the need for surface treatment or a separate adhesive layer. LH-8000 offers the lowest melting point of all the AH series resins, yet with the same desirable properties of other ETFEs, including non-stick, excellent processability, and superior chemical resistance.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-2150 is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as low-melt ETFE, smooth surface, non-adhesive, semi-commercial coating, applied through electrostatic coating method.

AGC Chemicals Americas, Inc. Fluon® ETFE ZL-522F is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and high fluidity. Various powder grades are available for different processing methods and application needs.

AGC Chemicals Americas, Inc. Fluon® ETFE ZL-521N is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and high fluidity. Various powder grades are available for different processing methods and application needs.

AGC Chemicals Americas, Inc. Fluon® ETFE Z-885C is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as non-stick coating, applied through electrostatic coating method.

AGC Chemicals Americas, Inc. Fluon® ETFE Z-8820X is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as non-stick coating, applied through electrostatic coating method.