Products

Hexamoll® DINCH functions as a non-phthalate plasticizer ideal for PVC and other polar polymers, especially in applications involving close human contact. Its clear, colorless, and almost odorless liquid composition makes it practically anhydrous. This plasticizer exhibits compatibility with common organic solvents, as well as other monomeric plasticizers used in PVC, while being nearly insoluble in water.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXMP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-2300N is a melt-processable copolymer of tetrafluoroethylene and ethylene. It offers a unique combination of properties such as enhanced resistance to heat and chemical attack, and exceptional physical toughness. Rotational molding and lining grades are formulated as free-flowing powders with specific particle morphologies to uniformly coat complex and challenging parts. It is used in rotational lining of components in the Chemical Process Industry (CPI) for fluid handling such as valves, pumps, pipes, fittings, tanks, and other intricate parts.

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® ETFE C88AXMP-HT is a high-performance melt-processable copolymer of tetrafluoroethylene and ethylene that is designed for use in automotive applications. It offers improved thermal stability and performs better at higher temperatures than standard ETFE, with a maximum operating temperature of 200ºC. Its enhanced stress crack resistance, abrasion resistance, and mechanical strength make it suitable for ultra-thin layer insulation in vehicles and aircraft where reducing carbon footprint and increasing fuel efficiency is important.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-730A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-730A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications.

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® ETFE ZL-522F is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and high fluidity. Various powder grades are available for different processing methods and application needs.

AGC Chemicals Americas, Inc. Fluon® ETFE TL-584 is a melt-processable copolymer of tetrafluoroethylene and ethylene that boasts a unique combination of desirable properties, including higher resistance to heat and chemical attack, as well as outstanding physical toughness. Rotational molding and lining grades of Fluon® ETFE TL-584 are designed to be free-flowing powders with the necessary particle morphologies to uniformly coat even the most challenging and complex parts.

AGC Chemicals Americas, Inc. Fluon® ETFE TL-581 is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and high fluidity. Various powder grades are available for different processing methods and application needs.

AGC Chemicals Americas, Inc. Fluon® ETFE LM2300K is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher heat and chemical attack resistance and outstanding physical toughness. Its rotational molding and lining grades are designed to be free-flowing powders with particle morphologies necessary to uniformly coat the most challenging and complex parts.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-720A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-720A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications. Additionally, it has better stress crack resistance compared to LM-730A.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-740A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-740A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications. Additionally, it has a higher flow rate than LM-730A.

PolyClad is a highly reflective foil sheet, specially clear coated or transparently colored then precisely cut to a specific particle size distribution. This light, fade resistance and colorfast material is an ideal additive for plastics, injection molding, roto-molding and masterbatch extrusion. Due to the technology the Polyclad is not recommend for use in water-based equipment.

PolyClad is a highly reflective foil sheet, specially clear coated or transparently colored then precisely cut to a specific particle size distribution. This light, fade resistance and colorfast material is an ideal additive for plastics, injection molding, roto-molding and masterbatch extrusion. Due to the technology the Polyclad is not recommend for use in water-based equipment.

PolyClad is a highly reflective foil sheet, specially clear coated or transparently colored then precisely cut to a specific particle size distribution. This light, fade resistance and colorfast material is an ideal additive for plastics, injection molding, roto-molding and masterbatch extrusion. Due to the technology the Polyclad is not recommend for use in water-based equipment.

PolyClad is a highly reflective foil sheet, specially clear coated or transparently colored then precisely cut to a specific particle size distribution. This light, fade resistance and colorfast material is an ideal additive for plastics, injection molding, roto-molding and masterbatch extrusion. Due to the technology the Polyclad is not recommend for use in water-based equipment.

PolyClad is a highly reflective foil sheet, specially clear coated or transparently colored then precisely cut to a specific particle size distribution. This light, fade resistance and colorfast material is an ideal additive for plastics, injection molding, roto-molding and masterbatch extrusion. Due to the technology the Polyclad is not recommend for use in water-based equipment.

Fluorescent dye for NTD applications

Fluorescent dye for plastics

The ARAPLAST carrier is based on a modified polyester resin technology designed especially for coloring Olefin (HDPE, MDPE, LDPE, PP, cPP) and TPU polymers revealing high heat stability, excellent plate out and migration performance. The ARAGEN-10 pigments are the better option for Engineering plastics (PES, PET, PC, POM, PA12), rupper, silicon and EVA

The ARAPLAST carrier is based on a modified polyester resin technology designed especially for coloring Olefin (HDPE, MDPE, LDPE, PP, cPP) and TPU polymers revealing high heat stability, excellent plate out and migration performance. The ARAGEN-10 pigments are the better option for Engineering plastics (PES, PET, PC, POM, PA12), rupper, silicon and EVA

Fluorescent dye for plastics

The ARAPLAST carrier is based on a modified polyester resin technology designed especially for coloring Olefin (HDPE, MDPE, LDPE, PP, cPP) and TPU polymers revealing high heat stability, excellent plate out and migration performance. The ARAGEN-10 pigments are the better option for Engineering plastics (PES, PET, PC, POM, PA12), rupper, silicon and EVA

The ARAPLAST carrier is based on a modified polyester resin technology designed especially for coloring Olefin (HDPE, MDPE, LDPE, PP, cPP) and TPU polymers revealing high heat stability, excellent plate out and migration performance. The ARAGEN-10 pigments are the better option for Engineering plastics (PES, PET, PC, POM, PA12), rupper, silicon and EVA

Solid state fluorescent pigment for NTD and stationary appications

The ARAPLAST carrier is based on a modified polyester resin technology designed especially for coloring Olefin (HDPE, MDPE, LDPE, PP, cPP) and TPU polymers revealing high heat stability, excellent plate out and migration performance. The ARAGEN-10 pigments are the better option for Engineering plastics (PES, PET, PC, POM, PA12), rupper, silicon and EVA

The ARAPLAST carrier is based on a modified polyester resin technology designed especially for coloring Olefin (HDPE, MDPE, LDPE, PP, cPP) and TPU polymers revealing high heat stability, excellent plate out and migration performance. The ARAGEN-10 pigments are the better option for Engineering plastics (PES, PET, PC, POM, PA12), rupper, silicon and EVA

The ARAPLAST carrier is based on a modified polyester resin technology designed especially for coloring Olefin (HDPE, MDPE, LDPE, PP, cPP) and TPU polymers revealing high heat stability, excellent plate out and migration performance. The ARAGEN-10 pigments are the better option for Engineering plastics (PES, PET, PC, POM, PA12), rupper, silicon and EVA

Fluorescent dye for plastics

Fluorescent dye for plastics

The ARAPLAST carrier is based on a modified polyester resin technology designed especially for coloring Olefin (HDPE, MDPE, LDPE, PP, cPP) and TPU polymers revealing high heat stability, excellent plate out and migration performance. The ARAGEN-10 pigments are the better option for Engineering plastics (PES, PET, PC, POM, PA12), rupper, silicon and EVA

The ARAPLAST carrier is based on a modified polyester resin technology designed especially for coloring Olefin (HDPE, MDPE, LDPE, PP, cPP) and TPU polymers revealing high heat stability, excellent plate out and migration performance. The ARAGEN-10 pigments are the better option for Engineering plastics (PES, PET, PC, POM, PA12), rupper, silicon and EVA

Fluorescent dye for NTD applications