Products

McLube® 1038 is a non-transferring, semi-permanent coating with cutting edge additives that make it ideal for epoxy molding and epoxy-bound composite manufacturing. Heat or air-cured.

McLube® 1700L is a PTFE dispersion with binding additives offering semi-permanent, non-transferring release characteristics. Ideal for injection molding. Silicone-free. Also, an excellent dry lubricant.

McLube® 799 is a water-based dispersion of finely divided fluoropolymers designed to provide excellent release of mandrel-built epoxy-bound composites. Chemically inert and durable enough to withstand harsh curing conditions.

McLube® 1212 is a water-based dispersion of fluoropolymers and proprietary binder technology formulated for effortless release of epoxies and other resins and binders. No cure required. Dilutable.

McLube® 857 is a highly lubricious release emulsion in water. Ideal for epoxy and some polyurethane applications. Cured when dry at room temperature.

McLube® 1850 has excellent general-purpose release for any plastic compound. Will offer multiple releases per application. Dries instantly with no cure required.

McLube® 787 is a water-based, heat-cured emulsion designed to prevent prerelease of large rotationally molded parts and provide multiple releases per application. Delivered ready-to-use.

McLube® 2100 contains finely divided PTFE that works its way into every microporosity on the mold surface to seal the substrate for an enhanced releasing effect. Silicone-free.

McLube® 973 is a water-based, heat-cured emulsion that forms a durable, protective film coating with semi-permanent qualities. Contains a catalyst to significantly shorten the heat-cure cycle.

McLube® 974 is a water-based, heat-cured emulsion designed to prevent prerelease of large rotationally molded parts and provide multiple releases per application. Does not require a lengthy heat cure cycle.

McLube® 3014 prevents undue buildup of the polyurethane foams used to insulate or strengthen some rotomolded parts. Easy-to apply and entirely silicone-free. May be easily wiped from the part once foaming is complete.

McLube® 916 is ideally formulated for double-wall parts, this release agent forms a durable, protective film with a high degree of slip. May be heat-cured for multiple releases per application.

McLube® 971 is a solvent-based solution of active ingredients designed to release epoxy (thermosets/ prepregs) and other composite binders. Non-transferring, heat or air cure.