Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Chemical Family
- Product Type
- Active Ingredients
- 0.85
- Residues Aspects After Drying on Metal and On Rubber Surface
- Colourless
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Benefits
- Single product for multiple of uses
- Allows dismantling of even severely corroded parts saving time and money
- Inhibits corrosion on all metals, will not damage decorative finishes
- Restores seized and corroded parts
- Lubricates even the most delicate of components
- Penetrates deeply into hard to reach areas
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Applications
BDX performs in 4 main categories:
- Lubrication - Use as a lubricant on most metal moving parts including small bearings, hinges, locks, chains, wire ropes, slides and guides etc.
- Releasing - As a superb release agent for even heavily corroded and/or seized components. Dissolving even heavy rust deposits with ease and releasing working parts and threads.
- Restoration - If an item/component has been subjected to seizure, rust or wear, BDX will perform a highly effective restoration process removing rust and contaminants, returning the treated component to usable condition and laying down a strong protective molecular layer on the surface of the part to prevent a recurrence of the problems.
- Protection - Rapidly combating moisture and corrosion, leaving a clean and lubricated surface, BDX is particularly effective in chemical, salt water and high humidity environments. BDX also offers superb performance as an assembly lubricant assisting in the assembly of new machine parts and protecting new parts from weathering galling and seizure for greatly extended periods. Highly recommended for mining and/or off shore oil and marine applications.
Properties
- Appearance
- Milky
- Odor
- Very Low
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Flash Point (Closed Cup) | 230.0 | °C | ASTM D 93 |
| Density | 0.835 | g/cm3 | — |
| Kinematic Viscosity (40°C, NFT 60-100) | 12.5 | mm²/sec | — |
| Evaporation (20°C, + 24h) | 3.0 | % | — |
| Evaporation (20°C, + 48h) | 5.0 | % | — |
| Dry Extract (120°C / 1hour) | 67.9 | % | — |
| Temperature of Use | -40 to 280 | °C | — |
| Diffusion (20°C) | 50.0 | mm | — |
| Salt Spray Test | min. 200 | hours | ASTM B117 |
| Resistivity (25°C, Ransburg Cell Type 234/13696) | 10000.0 | k ohms | — |
| Surface Tension (25°C, NF) | 21.7 | mJ/m² | ISO 304 |
| Sedimentation (After 24h) | 0.0 | % | — |
| Test 4 Ball Extreme Pressure (1450 rpm) | 280.0 | kg | ASTM D 2266B |
| Test 4 Ball Wear Scar (1450 rpm) | 0.45 | mm | ASTM D 2596 |
| Static Friction Coefficient Sliding Angle Test | 0.2 | — | — |
| Copper Corrosion | Pass | — | IP 112 |
| Dynamic Corrosion Resistance (EMCOR) | 0.0 | — | IP 220 |
Packaging & Availability
- Packaging Type