Knowde Enhanced TDS
Identification & Functionality
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Typical Properties of the Coating with MECOSTAT-3/09
- longterm antistatic finishing for several years with reduction of the surface resistance as far as 1*107Ω at standard climatic conditions
- antistatic effect also at very low humidity (< 20%)
- strong adhesion of the antistatic agent to the plastic surface resulting in high stability against physical effects such as friction etc.
- temperature resistant coating results in unproblematic thermoforming without impairing the antistatic finishing
- excellent wetting properties on plastic surfaces resulting in excellent antistatic finishing even under difficult thermoforming conditions
- the slip properties of the plastic surfaces are considerably improved by the coating, and therefore improves the stackability of the thermoformed parts
- MECOSTAT-3/09 replaces the additives used until now to a large extent
- no migration into the liquid filled, no accumulation during recycling
- striation-free highly transparent coating
- MECOSTAT-3/09 is highly productive and therefore keeps down costs of antistatic finishing
- usable in the packing industry for foodstuffs according to EC-Directives
- problem-free recycling of coated plastics
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Areas of Application
- films, sheets, profiles and thermoformed parts of all types (films up to 1500 µm)
- packing for food
- molded, injection molded and hollow bodied parts
- fabrics, mono- and multifilaments
- foam materials and foam packing material
- Processing Directions
- the following processes are suitable for coating: immersion, felt application, roll coating and application by flexographic or gravure printing, spray coating, rotor spraying coating (the
- appropriate procedures depend on the purpose of application).
- if MECOSTAT-3/09 is applied on warm plastic surfaces, the surface temperature should not exceed 80 °C
- coating amount: according to the purpose of application between 1.0 and 3.5 g per sqm (wet coating amount)
- the coated surface must be completely dry before further processing or winding the film (if required, drying with warm air)
- MECOSTAT-3/09 is supplied as a ready for use solution
- machine parts which come into contact with MECOSTAT-3/09 should be made of corrosion proof materials but not from copper, aluminum and their alloys
- a combination of MECOSTAT-3/09 with antistatic additives is not recommended because of possible reactions
- depending on the application, a corona pretreatment is recommended (e.g. polyolefines and polystyrene)
Properties
- Physical Form
Technical Details & Test Data
- Calculation of the consumption rate
Consumption rate of MECOSTAT-3 per kg plastic
Coated sheet per kg MECOSTAT-3
Typical value of spec. weights of different plastics
The exact specific weight depends on both, the plastic formula used and on the additives used. Therefore, the given values are only approximated values.
APET 1.35 g/cm³ PVC 1.42 g/cm³ PP 0.93 g/cm³ PETG 1.17 g/cm³ LDPE 0.95 g/cm³ HDPE 0.92 g/cm³ PS 1.10 g/cm³ ABS 1.12 g/cm³ PC 1.20 g/cm³ PTFE 2.16 g/cm³ PMMA 1.18 g/cm³ PUR 1.25 g/cm³
Safety & Health
- Safety
- MECOSTAT-3/09 as well as the raw materials contained in it comply with the appropriate ECDirectives on the antistatic finishing of plastics in food packaging.
- MECOSTAT-3/09 is environment-friendly and easily biodegradable.