Knowde Enhanced TDS
Identification & Functionality
- Ingredient Origin
- Cosmetic Ingredients Functions
- EC No.
- 2883235, 6009758
- Technologies
- Source of Origin of Components
INCI Name Source of Origin Place of Origin Lauryl Glucoside Vegetable (Coconut/ Palm kernel/ Palm oil) European Union Olive Oil Polyglyceryl-6 esters Vegetable (Olive oil from olive fruit and polyglycerol from rapeseed) European Union
Features & Benefits
- Benefit Claims
- Labeling Claims
- Product Highlights
- Olivatis® 20 is an outstanding emulsifier for troublesome emulsions too.
- Rather than an emulsifier, Olivatis® 20 can be classified as a hydrophilic lipid, forming fluid O/W emulsions, very fresh and light and with a unique and pleasant velvet effect.
- Olivatis® 20 is globally compliant, is approved by Cosmos as a natural ingredient and is RSPO Mass Balance certified.
- Olivatis® 20 should be used as a cold process emulsifier at an emulsifier/oil ratio of 1:1 or 1:2; for low viscosity emulsions it is recommended to use a low amount (0,1-0,2%) of a popular stabilizer (such as xanthan gum, guar gum, etc).
- Olivatis® 20 is compatible with all kinds of oil-soluble ingredients such as esters, triglycerides and silicones.
- Olivatis® 20 is suitable for all applications where heating is not possible or desired. Although it has no thickening effect, in combination with Carbomed 940EZ, Olivatis® 20 makes possible the preparation of creams.
Applications & Uses
- Markets
- Applications
- Skin Care Applications
- Wipes, Tissue & Towel Applications
- Applications
GENERAL EMULSIFICATION PROCEDURE
Use with high-shear mixer
- If a high-shear mixer is available, Olivatis® 20 can be mixed with oils and the achieved phase can be added to the water phase under high shear.
Use without high-shear mixer
- Olivatis® 20 must be pre-dispersed in water before the addition of fats and the required amount of water is usually 5 times the amount of Olivatis® 20 (e.g. a formulation containing 2,5% of Olivatis® 20 should be dispersed in 15% of water). The dispersion can be slightly rheopectic (viscosity increases increasing the speed of stirrer) therefore speed must be reduced in case of thickening.
- After the dispersion of Olivatis® 20, add fats and oils under stirring and make a primary emulsion.
- Once the emulsion is homogenous, add the rest of water containing stabilizers, preservatives and other water-soluble ingredients.
REQUIRED CONCENTRATION
- Usually, better results are achieved with a ratio of 1 part of Olivatis® 20 with 2 parts of oil phase. The ratiomay change depending on the nature of the oil used in the formulation
STABILIZERS
- Fluid emulsions can be stabilized with ordinary thickening agents such as xanthan gum, hydroxypropyl guar, sclerotium gum, etc. Inorganic thickeners such as magnesium aluminum silicate are compatible and useful as stabilizers too. It is recommended to disperse gums into the water phase
- The addition of slight amounts (0,5-1%) of Sorbitan Monoleate increase the emulsion stability. Longchain fatty alcohols, such as Octyldodecanol, also increase the emulsion stability.
CREAMS
- Olivatis® 20 is compatible with Carbomed 940EZ (Carbomer 940). Therefore; if a higher viscosity is required, a 0.5% of Carbomed 940EZ can be added, dispersing it into the water phase before starting the emulsification process.
Properties
- Physical Form
- Physico-Chemical Properties
Value | Units | Test Method / Conditions | |
Total Aerobic Count | max. 100 | CFU /g | — |
Yeasts and moulds | max. 10 | CFU /g | — |
Shelf life | 24 Months (Last Day Of The Month) | — | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Additives (Chemical Substances Intentionally Added)
Olivatis® 20 contains the following impurities from manufacturing process:
Impurities p-Tolune Sulfonic Acid: <0,1% w/w (origin: catalyzer) Animal derivatives: free Chlorinated solvents: free Dichloroacetic acid: free Diethylene glycol, propylene glycol, eth-ylene glycol: free Dimethyl sulfate: free Ethanol and other alcohols with boiling point <150 °C: free Ethylene oxide: free Fragrance allergens (Reg. EC 1223/2009): free Free amines: free GMO: free Gluten: free Lactose: free Latex: not expected to be present in the product on the ground of the information on the raw materials used in the manufacturing process. Monochloroacetic acid: free Mycotoxins: complies with limits of Regulation CE 1881/2006 for vegetal oils Nitrosamines: free Organic solvents: complies with the regulatory requirements for limits for pesticides used in agricul-ture: <0,05 ppm Pesticides: free Petrolatum: free Phthalates: free Polycyclic aromatic hydrocarbon (PAH): free Propylene oxide: free P-Toluene sulfonic acid: free Siloxanes: free Total heavy metals (As, Pb, Cd, Sb, Hg, Ni, Cr (VI) ): max. 10 ppm VOC: not expected to be present in the product on the ground of the manufacturing pro-cess and raw materials used. 1,4-dioxane: free - Regulatory Summary of Olivatis® 20
Additives (chemical substances intentionally added)
- Olivatis® 20 does not contain any of the following additives: solvents, preservatives, antioxidants, stabilizers, for-maldehyde and formaldehyde donors, and phthalates.
Phthalates, CMR Substances and SVHC
- Olivatis® 20 does not contain Phthalates and any substance classified carcinogenic, mutagenic, or toxic for repro-duction (CMR substances) by the European commission above 0.001% threshold.
- Olivatis® 20 does not contain substances identified of very-high concern by ECHA.
Volatile Organic Compounds (VOC)
- Not present. above 0,01% threshold
Glycols and Glycol Ethers
- Olivatis® 20 does not contain alkyl diols (glycols) and ethers solvents (alkyl ethers of ethylene glycol or propyl-ene glycol).
Convention on International Trade in Endangered Species (CITES)
- The production of Olivatis® 20 does not involve raw materials obtained from species protected by the CITES con-vention.
Nanomaterials
- Olivatis® 20 does not contain nanomaterials as defined by Regulation EC 1223/2009.
BSE/TSE
- Olivatis® 20 is produced entirely from materials of vegetal origin which are therefore free from human or any other animal derived materials including bovine products. Furthermore, no animal derived component is used in the manufacturing or handling processes of Olivatis® 20 . As such, this material can be declared free of Bovine Spongiform Encephalopathy (BSE) and Transmissible Spongiform Encephalopathy (TSE).
Gamma Rays and Other Radiation Treatment
- Olivatis® 20 is not subjected to any treatment with ionizing radiation.
Regulatory Compliance for Cosmetics
- Olivatis® 20 complies with Reg. EC 1223/2009.Olivatis® 20 is not prohibited (Annex II) or limited (Annex III) for the use in cosmetics by Regulation EC 1223/2009.
- ISO 16128: Olivatis® 20 has a natural origin index of 1.
Nagoya Protocol
- Olivatis® 20 falls outside the scope of Nagoya protocol regulation.
Conflict Minerals
- Olivatis® 20 does not involve any conflict minerals as defined under US conflict minerals Trade Act (Coltan, Tan-talum; Cassiterite, Gold, Wolframite or their derivatives).
- The production of Olivatis® 20 does not involve any other mineral and its derivatives determined by the US Sec-retary of State to be financing conflict in the Democratic Republic of Congo or adjoining countries (Angola, Congo, Central African Rep. Sudan, Uganda Rwanda, Burundi, Tanzania, Zambia).
HALAL
- Olivatis® 20 is not produced from unlawful or forbidden substances under Halal rules. No unlawful or forbidden material under Halal rules is used or added during manufacturing or packaging.
KOSHER
- Olivatis® 20 is not produced from unlawful or forbidden substances under Kosher rules. No unlawful or forbid-den material under Kosher rules is used or added during manufacturing or packaging.
California Proposition 65
- Olivatis® 20 does not contain substances listed in California Prop. 65 Regulation.
Manufacturing Place
- Italy
Safety & Health
- Toxicological Data
Skin irritation: Not irritant
Reference: OECD Guidelines for The testing of Chemicals: TG n˚439 - Adopted: 18 June 2019,Corrected: 26 June 2020 (Annex 2).
In Vitro Skin Irritation: Reconstructed Human Epidermis Method
Eye irritation: Not Irritant
Reference: OECD Guidelines for The testing of Chemicals, section 4: Test N˚492- Adopted 14 June 2019.Reconstructed human Cornea-like Epithelium (RhCE) test method for identifying chemicals not requiring classifi-cation and labeling for eye irritation or serious eye damage.
Data on single substances of the mixture
Olive Oil Polyglyceryl-6 Esters: CIR Safety Assessment of Polyglyceryl Fatty Acid Esters as used in cosmetics. Final report 14 November, 2016.
Lauryl Glucoside: International Journal of Toxicology 32 (Suppl.3):22-48,2013- safety assessment Decyl Glucoside and other alkyl glucosides.