Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Density (at 23°C) (Part A) | 0.98 - 1.02 | g/cm³ | - |
Density (at 23°C) (Part B) | 1.20 - 1.24 | g/cm³ | - |
Viscosity (at 23°C) (Part A) | 250 ± 100 | mPas | - |
Viscosity (at 23°C) (Part B) | 140 ± 20 | mPas | - |
Mixing Ratio (Part A : Part B) | 1 : 1 | - | - |
Pot Life (at 20°C) | 30 ± 5 | Minutes | - |
Cure Time (at 20°C) | approx. 2 | Hours | - |
Processing Temperature | min. 10 | °C | - |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety Guidelines
Adequate ventilation or use of a respirator (filter A2) is required in enclosed spaces. We recommend approved eye protection and gloves during application.
Packaging & Availability
- Packaging Type
- Packaging
- Part A: 9 kg pail
- Part B: 9 kg pail
Storage & Handling
- Installation Guidelines
Empty entire contents of component B into component A. Mix it by using a low speed drill (ca. 300 U/min) for 3-5 minutes. In order to avoid mixing errors the mixture should be poured into a clean container and mixed again for 1 minute. Apply the mixture with a high quality roller, brush or squeegee. If solvent was added to the product, it is important that the solvent has evaporated completely before applying the coating. PC 11-020 is insensitive to moisture. Nevertheless, it is important to protect uncured PC 11-020 against moisture. Moisture may induce the formation of bubbles, which may reduce adhesion strength. Open time 48 h. If this time is exceeded, the primer coat should be slightly grinded or a new primer coat should be applied.
Consumption:
Solvent-free approx. 150-200 g/m²- Storage
Store PC 11-020 in a dry and cool place. Shelf life of product stored in original unopened containers is 6 months.