Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Application Method
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Density (at 20°C) (Part A) | 1.7 | g/cm³ | — |
Hardness | 70 - 80 | Shore A | DIN 53505 |
Density (at 20°C) (Part B) | 1.22 | g/cm³ | — |
Viscosity (at 20°C) (Part A) | Thixotropic | — | — |
Viscosity (at 20°C) (Part B) | 120 ± 20 | mPas | — |
Flash Point | min. 200 | °C | — |
Pot Life (at 20°C) | 45.0 | Minutes | — |
Cure Time (at 20°C) | 4 - 6 | Hours | — |
Mixing Ratio (Part A : Part B (By Weight)) | 100 : 14 | — | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety Guidelines
Approved eye protection and gloves are recommended during application. Adequate ventilation or using of protection masks is required during the application process in bad ventilated areas.
Packaging & Availability
- Packaging Type
- Packaging
- Part A: 12 kg pail
- Part B: 1.7 kg pail
Storage & Handling
- Installation Guidelines
PC 21-030 Part A and Part B must be power mixed for 3-5 minutes. Pour mixture in a clean pail and mix again for 1 minute. For backing tape applications, apply the adhesive with a notched trowel to the tape and press the artificial turf into the adhesive. Roll the bond line again with a roller after approx. ½ hours (depending on the temperature).
Processing temperature: min. 15°C surface and air temperature
Consumption: approx. 350 – 400 g / running meter- Storage
PC 21-030 must be stored dry and cool in closed containers. The shelf life of PC 21-030 is 6 months in unopened original containers.