Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Markets
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Density (at 23°C) (Part A) | 1.3 | g/cm³ | - |
Hardness | 75 - 85 | Shore A | DIN 53505 |
Density (at 23°C) (Part B) | 1.22 | g/cm³ | - |
Viscosity (at 23°C) (Part A) | Structural Viscosity | - | - |
Viscosity (at 23°C) (Part B) | 120 ± 20 | mPas | - |
Mixing Ratio (Part A : Part B (By Weight)) | 5 : 1 | - | - |
Pot Life | approx. 40 | Minutes | - |
Drying Time (Accessible) (at 23°C) | approx. 6 - 8 | Hours | - |
Drying Time (Accessible) (at 23°C) | Fully Cured after 7 Days | - | - |
Processing Temperature | min. 15 | °C | - |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Precautions
Use goggles and gauntlets when handling. Ensure adequate ventilation when handling indoors. Use Polycomp-cleaner to clean tools and equipment.
Packaging & Availability
- Packaging
- Component A: 16,5 kg Container
- Component B: 3,3 kg Container
Storage & Handling
- Installation Guidelines
Mix components A and B in the prescribed ratio using a mortar mixer powered by a power-drilling machine. Mixing-time: approx. 3-5 min. depending on the agitating capacity of the mixer. To prevent soft spots in the cured coating we recommend refilling the mix into another container before trowelling the fluid plastic compound at the final location.
Consumption: approx. 600 - 700 g / m² for rubber mats
approx. 1,4 kg / m² for in-situ elastic layers- Storage
PC 41-010 should be stored in a cool and dry place. Shelf life of product in unopened original containers is 6 months. Opened containers have to be closed carefully, protected against moisture and used as soon as possible.