Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Markets
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Density (at 20°C) (Mixture) | 1.19 | g/cm³ | - |
Viscosity (at 20°C) (Part A) | 12000 ± 1000 | mPas | - |
Viscosity (at 20°C) (Part B) | 5000 ± 500 | mPas | - |
Mixing Ratio Part A : Part B (By Volume) | 1 : 1 | - | - |
Mixing Ratio (Part A : Part B (By Weight)) | 1 : 0,9 | - | - |
Pot Life | 45 ± 10 | Minutes | - |
Processing Temperature | min. 10 | °C | - |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety Guidelines
PC 51-040 must be stored dry and cool. Avoid contact with water when the component A has been mixed with the component B, there may otherwise form foam.
Packaging & Availability
- Packaging Type
- Packaging
- Part A: 240 kg drums
- Part B: 210 kg drums
Storage & Handling
- Installation Guidelines
PC 51-040 A-component is ready for use and should be homogenized before processing only. PC 51-040 A- and B-components are stirred in the described mixing ratio in a mixer for 3-5 minutes. In order to exclude mixing errors the mixture should be poured into a new, clean container and mixed again for 1 - 2 minutes. After the mixing, PC 51-040 is applied to the pre-treated substrate with a squeegee. The tooth size should be selected according to the thickness of the required layer.
- Storage
PC 51-040 should be kept in a dry and cool place. Shelf life of product stored in unopened original containers is 6 months, contents must be protected against moisture. After prolonged storage the suitability of PC 51-040 needs to be examined. Open containers have to be closed carefully, protected against moisture and used as soon as possible.