Products

Metco WR is a liquid admixture for concrete and mortar that allows water reduction without sacrificing slump or workability. Through a chemical process, it internally lubricates the cement matrix to increase the efficiency of any cementitious system. This allows the production of concrete and mortars with higher strengths, better freeze/thaw resistance, and lower permeability. It can also be used to increase the workability of concrete and mortar while maintaining water content.

Diamite CSC is a 100% solids, high performance epoxy compound intended for use as a chemical-resistant and containment coating to protect concrete, brick or block walls and floors. Diamite CSC is resistant to most acids, caustics, solvents and other harsh chemicals. Diamite CSC is applied to walls and floors of spill, splash and chemical leakage containment areas.

Metalcrete Industries COLOR-ROK EXTERIOR COAT is a one-component, crystal clear liquid coating specifically formulated as an exterior top coat for Color-Rok quartz aggregate decorative surfacing. Also excellent as a clear coating for exterior surfaces of concrete, terrazzo, brick or stone. Not recommended as a coating for exterior wood.

Metalcrete Industries COLOR-ROK FLOORING is an epoxy coating and colored silica quartz system used to decorate and protect most substrates including concrete, stone, wood, and metal. The Color-Rok Flooring system produces a seamless, slip-resistant surface while offering protection from abrasion and chemical attack. Use on any floor, walkway, or ramp where safety precautions against slippery conditions are important and sanitary cleaning is mandatory.

Diamite Brushkote VOC is a water based, high performance epoxy coating intended to protect a wide range of substrates from abrasion and chemical attack. Diamite Brushkote VOC is totally VOC compliant, allowing application indoors without toxic odors and is an excellent choice where an easy to clean and durable surface is desired.

Lexite Conductive Primer is a two-part epoxy coating system that exhibits excellent abrasion resistance as well as static dissipative properties. Lexite Conductive Primer is intended to be used in conjunction with Lexite Conductive Top Coat. Lexite Conductive Primer may be applied to concrete and metal substrates.

Lexite Conductive Top Coat is a high build, static dissipative epoxy top coating intended to protect horizontal surfaces against both abrasion and chemical attack. Lexite Conductive Top Coat may be applied to concrete and metal substrates. It is important that this product be used in conjunction with Lexite Conductive Primer to achieve proper resistance performance.

Metalcrete Industries Superslump is a liquid admixture for concrete and mortar that allows water reduction without sacrificing slump or workability. Through a chemical process, it internally lubricates the cement matrix to increase the efficiency of any cementitious system. This allows the production of concrete and mortars with higher strengths, better freeze/thaw resistance, and lower permeability. It can also be used to increase the workability of concrete and mortar while maintaining water content.

Lexite 100 is a single application, high build epoxy coating intended to protect horizontal surfaces against both abrasion and chemical attack. Lexite 100 may be applied to most substrates including concrete, brick, stone, wood, metal and other coatings that are firmly bonded to the base substrate.

Diamite AGC is a water-based epoxy coating intended to protect a wide range of substrates from graffiti abuse. Diamite AGC is resistant to spray paint, ink, crayons and harsh chemicals and may be applied to virtually any sound, clean and dry surface. Diamite AGC provides a smooth, attractive and easy-toclean surface.

Diamite Brushkote is a solvent-based epoxy coating intended to protect a wide range of substrates from chemical and abrasion attack. It is immune to harsh chemicals including caustics and most acids. Diamite Brushkote is an excellent choice where a smooth, attractive and easy-to-clean surface is desired.

Diamite Extreme is a 95 percent solids, high performance proprietary novolac epoxy compound intended for use as a chemical-resistant and containment coating to protect concrete, brick or block walls and floors. Diamite Extreme is resistant to most acids, caustics, solvents and other harsh chemicals. Diamite Extreme is applied to walls and floors of spill, splash and chemical leakage containment areas.

Metalcrete Industries Accel-Set is a non-chloride and noncorrosive based liquid admixture formulated to accelerate the set of concrete in cold weather. Accel- Set is added to portland cement concrete at the ready-mix plant or job site. Accel-Set also improves workability while increasing early age strengths of concrete.

Metalcrete Industries Acrylpave is a water-based, VOC compliant latex designed to be added to portland cement based systems of all types to enhance hardened properties. Through internal reinforcement of the cementitious system, greater bond, flexural, and tensile strengths can be achieved. Acrylpave internally reinforces the cement matrix, thereby giving the system a two way strength mechanism. In addition, Acrylpave can dramatically improve freeze/thaw, scaling, and salt resistance and damp proofs against water ingress.

Diamite NEC is a 100% solids, high performance novolac epoxy compound intended for use as a chemical-resistant and containment coating to protect concrete, brick or block walls and floors. Diamite NEC is resistant to most acids, caustics, solvents and other harsh chemicals. Diamite NEC is applied to walls and floors of spill, splash and chemical leakage containment areas.