Knowde Enhanced TDS
Identification & Functionality
- Chemical Name
- Product Type
- Technologies
- Areas of Application
Features & Benefits
- Benefit Claims
- Labeling Claims
- Ready-to-Use Product Features
- Key Attributes
- Non-flammable—safe for use on energized circuits
- Compatible with live electrical equipment and electronic components
- Chemically inert
- Moisture free
- Ozone safe
- Low toxicity
Attention :For energized electronic equipment use only.
Applications & Uses
- Markets
- Application Method
- Instructions
To remove safety tab
- Firmly hold the head of the nozzle and trigger in place.
- Pull tab forward on top of nozzle until it snaps off
To clean surfaces
- Spray directly on dusty component using bursts of spray. Clean contaminations from top to bottom to avoid redeposit of dust on clean areas.
- Use extension tube to direct the spray in hard to reach corners.
Tip !
Avoid continuous spray that causes component to reach freezing temperatures. In contact with moist air, cooled components could lead to unwanted frost formation. Avoid touching the component directly with your hands, nozzle, or extension straw.
Attention !
Holdcanuprightto avoid ejection of liquid stream during use. Do NOT spray when container is more than 45 degrees off vertical or inverted.
Properties
- Physical Form
- Odor
- Very slight, ether-like
- Physical Properties
- Specifications
Value | Units | Test Method / Conditions | |
Color | Colorless | — | — |
Molecular Weight | 102 | g/mole | — |
Boiling Point | -26.2 (-15.2) | °C (°F) | — |
Density of Liquid (at 25 °C, 77 °F) | 1.21 | g/mL | — |
Flash Point | None detected | — | — |
Ozone Depleting Potential | 0 | — | — |
GWP (100 y global warming potential) | 1430 | — | — |
VOC (Volatile Organic Compound) | Exempt | — | — |
Purity | min. 99.5 | % | — |
Non-Volatile Residue | max. 0.01 | % | — |
Value | Units | Test Method / Conditions | |
Particulates/Solids | Visually clean | — | — |
Non Absorbed Gases | 1.5 | % | — |
Moisture Content | max. 10 | ppm | — |
Acidity | max. 1 | ppm | — |
Halides | max. 1 | ppm | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Safety & Health
- Areas of Application
Please see the 402A Super Duster™ 134 Safety Data Sheet (SDS) for more details on transportation, storage, handling and other security guidelines.
Environmental Impact : In the USA and Canada, this is VOC-exempt product that has very low environmental toxicity. Its 100 years global warming potential is 1430, and its Ozone Depleting Potential is 0.00.
This product is a fluorinated gas with high global warming potentials. It is subject to various regional, national restrictions.
In the EU, it is subject to F-Gas rules.
This product meets the European Directive 2011/65/EU Annex II (ROHS); recasting 2002/95/EC.
In California, this product is restricted for use on energized electric circuits only.
Health and Safety : This product is not considered to be hazardous for human health under normal use. While this aerosol is classified as non-flammable according to Canadian and American criteria.
Inhalation overexposure following an intentional abuse or use in confined space may cause cardiac or central nervous systems effects.
Contact with the liquid may cause frostbite due to heat lost caused by rapid evaporation. Aerosol jet can reach sub-zero temperatures.
HMIS® RATING
NFPA® 704 CODES
Approximate HMIS and NFPA Risk Ratings Legend : 0 (Low or none); 1 (Slight); 2 (Moderate); 3 (Serious); 4 (Severe).
Packaging & Availability
- Packaging and Supporting Products
Cat. No. Packaging Net Volume Net Weight Packaging Weight
402A-285G Aerosol 236 mL/ 7.98 fl oz 285 g / 10 oz 4.1 kg a)/ 9 lb
402AR-285G Aerosol 236 mL/ 7.98 fl ozz 285 g/ 10 oz 4.1 kg a)/ 9 lb
402A-450G Aerosol 373 mL/12.6 fl oz 450 g/ 15.8 oz 5.0 kg a) / 11 lb - a) Pack of 10
Storage & Handling
- Storage and Shelf Life
Store at around room temperature. Use within -20 to 50 °C [-4 to 122 °F] and protect from direct heat or sunlight.