Products

The 406B Super Wash™ Electronics Cleaner is a very fast drying and zero residue cleaner degreaser for PC boards. This hydrocarbon-based cleaner is perfect for quick PC boards cleaning. When used as a secondary rinse, it accelerates the drying time of boards treated with slower drying cleaners. Great for dissolving many types of flux. Cleans and degreases printed circuit boards, machinery, electrical and electronic devices.

The 401B Nu-Trol™ Control Cleaner for Electronics is a unique blend of high purity solvents and a lubricating mineral oil that is excellent for cleaning and lubricating delicate moving parts in electronics. The solvent system also effectively dissolves oil and organic residues. This product is useful in a variety of electronics applications such as controls, potentiometers, dials, switches, tuners, and servomechanisms.

4225 Conformal Coating Epoxy4225 is a 2-part epoxy conformal coating. It cures to a durable, tough, semi-flexible coating with an excellent finish. 4225 protects against harsh chemicals, humidity, corrosion, oil, dirt, thermal shock, and abrasion. It also prevents high voltage arcing, short circuits, and static discharges. 4225 is a promising choice where extreme physical and chemical resistance are required.

High Temperature Epoxy, Encapsulating & Potting Compound 832HT is a general purpose, rigid, black, 2-part high temperature epoxy that provides extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies. It is useful when extreme physical strength and chemical resistance are required. It also provides excellent electrical insulation and protects components from static discharge, vibration, abrasion, thermal shock, environmental humidity, salt water, fungus, and many harsh chemicals.

The 8337 Speaker Service Cement is a flexible, durable, solvent-based, rubber resin adhesive that is designed for speaker repair.

The 403A Super Cold™ 134 is a pure, non-flammable cold spray that is used primarily for diagnosing thermally intermittent problems with electronic devices. The cold spray contains pure 1,1,1,2-tetrafluoroethane (HFC 134a).

8361A-P label and adhesive remover pen applies a solvent that soaks through labels to dissolve the adhesive backing, releasing the label. It can then be used to quickly clean up adhesive residues left behind. It can also be used to remove some inks and cured adhesives.

Black Flexible Epoxy, Encapsulating & Potting Compound 834FX is a 2-part, flame-retardant, thermally conductive, fexible epoxy resin that provides extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies. This product is designed for applications where minimizing the physical stress on components is critical. It is good in low temperature and arctic environments, and in applications that involve temperature cycling or rapid temperature changes. It provides the functionality of silicone, but with the durability and cost-effectiveness of epoxy.

High Thermal Conductivity Epoxy, Encapsulating & Potting Compound 834HTC is a 2-part, black, rigid, flameretardant thermal epoxy that provides extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies. This epoxy resin is designed for applications where thermal management and selfextinguishing are critical. It also provides excellent electrical insulation and protects components from static discharge, vibration, abrasion, thermal shock, environmental humidity, salt water, fungus, and many harsh chemicals.

403C Super Cold™ HFO-1234ZE is a non-flammable cold spray that is used primarily for diagnosing thermally intermittent problems with electronic devices. It is also useful for protecting heat sensitive components during soldering, quickly cooling solder joints, and it can also be used to quickly remove gum and other adhesives from a variety of surfaces.

8361 Label and Adhesive Remover is formulated to effectively remove adhesive, sticker, and ink residues. It contains a pleasant odor which makes the product easy to work with.

834B potting and encapsulating compound is a black, flame retardant, thermally conductive two-part epoxy that offers extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies. This product is designed for applications where thermal management and self-extinguishing are critical. It also provides excellent electrical insulation and protects components from static discharges, vibration, abrasion, thermal shock, environmental humidity, salt water, fungus, and many harsh chemicals. This epoxy has a convenient 2:1 volume mix ratio, making it compatible with most dispensing equipment. 834B can be cured at room temperature or higher.

8241 Isopropyl Alcohol 70/30 is an electronics cleaner. The liquid is fully miscible with water and a large variety of organic solvents, making it good at dissolving dirt, dust, greases, and light organic contaminants. It is quick drying relative to water and leaves no residue. As it dries, it gives off a light alcohol odor, which is not bothersome and serves as a cue to limit over-exposure due to poor ventilation. Since it is safe for paints, metals, and plastics, 8241 is widely used to clean a variety of electronic equipment and peripherals. Another use is to wash off harsh organic solvents like acetone that might damage the substrate surface.

UV Curable Conformal Coating 4200UV is a 1-part, UL-certified conformal coating formulated for rapid cure upon exposure to UV light. It is a low viscosity coating that retains high fluorescence after curing for ease of inspection, curing to a smooth, glass-like finish. The coating contains a secondary moisture cure mechanism that allows for curing in shadowed areas. 4200UV is a cost-effective option for large volume projects where both fast turn-around and higher throughput are required. It creates a rugged barrier protecting circuits from humidity, corrosion, fungus, dust, thermal shock and high voltage arcing.

832WC is a rigid, 2-part, clear epoxy resin that offers extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies. It is designed for applications where high clarity is required. It does not yellow when exposed to UV light; it maintains clarity in applications with service temperatures of up to 65 °C and intermittent exposures of up to 100 °C. It can be used for underwater applications such as potting swimming pool lights. It is also a good choice for casting resin.

Fast Set Epoxy 8332 is a quick-set 2-part epoxy adhesive. Bonded parts need only be held together for eight to ten minutes before handling. It offers excellent adhesion to a wide range of materials that are difficult to bond with, including glass, fiberglass, concrete, ceramics, woods, and most metals and plastics. This is a general-purpose adhesive suitable for household, industrial and manufacturing applications.

The 435 Thinner is a super-fast drying thinner, low VOC solvent for use with the MG Chemical’s conformal and EMI/RFI shielding coating products. It is designed to ensure good adherence to plastic substrates.

Total Ground Carbon Conductive Paint 838AR is an economical conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive carbon powder. It is smooth, durable, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. 838AR adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It provides strong corrosion resistance and is suitable for use in marine environments. 838AR is excellent for creating grounded surfaces and in low frequency RFI shielding applications, such as pickup cavities on electric guitars. It is also perfect for shielding metal detectors and other devices where a metal-filled conductive paint would cause malfunction.

EMI Conductive Paint 842WB is a 1-part, water-based conductive paint, pigmented with highly conductive silver flake. It is easy to use, with no let-down and no heat cure necessary. It can be applied by spray, brush or roller. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It also bonds well to drywall and can be painted over with common architectural paints. 842WB is designed to reduce EMI/RFI interferences in architectural and electronic applications.

Super ShieldTM Nickel Conductive Spray Paint 841AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with a highly conductive nickel flake. It is smooth, hard, and abrasion resistant. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT, PVA and ABS/PC blend. It also provides strong corrosion resistance and is suitable for use in marine environments. 841AR provides a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when corrosion resistance is a concern.

419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.

844AR is a one-part, solvent-based, permanent electrostatic dissipative (ESD) coating. It adheres strongly to plastics, paints, metals, and many other surfaces. The cured coating is flexible, durable, and will not crack, chip or peel. The coating can be cured at room temperature or higher. 844AR is commonly used in electronic assembly lines to protect against electrostatic charge build-up on tools, production conveyor and bumpers, assembly trays, workstation surfaces, and enclosures.

Super Shield™ Silver Epoxy Conductive Paint 842ER is a 2-part silver epoxy conductive paint. It is a smooth, flexible coating that provides excellent electrical conductivity at a low film thickness. It maintains flexibility at low temperatures, provides exceptional adhesion to a wide variety of substrates, and provides excellent environmental stability. 842ER is designed for large volume board-level or package-level EMI shielding applications. It can replace traditional metal lid, which reduces cost, board thickness, and mass.

419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.

SS4004P Pink, ready to use, silicone primer for use with two-part silicone RTV’s to promote adhesion on surfaces like plastic, glass, ceramic, wood, and metal. Bright pink color makes easy visual determination of uniform coating.

Highly Conductive Silver Coating for EMI Shielding Semiconductor Packages 842UR is a 1-part, heat-cured, silver polyurethane coating. It is a smooth, flexible coating that provides excellent electrical conductivity at a low film thickness. It maintains flexibility at low temperatures, provides exceptional adhesion to a wide variety of substrates, and provides excellent environmental stability. 842UR is designed for large volume board-level or package-level EMI shielding applications. It can replace traditional metal lid, which reduces cost, board thickness, and mass.

Silver Conductive Pen 842AR-P pen dispenses an acrylic lacquer pigmented with highly conductive silver flakes. The cured traces are durable and corrosion resistant. They adhere well to plastics and most electronic substrates. The traces are flexible, but the product works best on a smooth, flat, hard surface. The valve tip opens when pressed against the surface, and the flow is controlled by squeezing the barrel. This pen repairs damaged traces on keyboards, game controllers, remote controls, mixing boards, and PCBs. It also creates conductive traces for prototyping, hobbies, or maker projects. It is great for making small connections in or between circuits, such as jumpers, through-holes, bridges, and links. It can also be used to increase the surface area of contacts by painting the area around them. For applications where high conductivity is not required, the 838AR-P Carbon Conductive Pen and the 841AR-P Nickel Conductive Pen provide economical alternatives.

843AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with a highly conductive silver-coated copper flake. It is smooth, hard, and abrasion resistant. It is a ready-to-spray system, with no let down necessary. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT, PVA and ABS/PC blend. It provides excellent shielding levels at high frequencies. 843AR is designed to provide a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when higher levels of shielding are required.

838AR-P pen dispenses an acrylic lacquer pigmented with conductive carbon. The cured traces are durable and corrosion resistant. They adhere well to plastics and most electronic substrates. The traces are flexible, but the product works best on a smooth, flat, hard surface. The valve tip opens when pressed against the surface, and the flow is controlled by squeezing the barrel. This pen repairs traces on keyboards, game controllers or remote controls. It is also good for making small connections, such as jumpers, through-holes, bridges, and links. It is great for drawing resistors too, and it can be used to increase the surface area of contacts by painting the area around them. Use this pen when high conductivity is not required. For applications requiring lower resistance, use the 841AR-P Nickel Conductive Pen or the 842AR-P Silver Conductive Pen.

843WB is a 1-part, water-based conductive paint, pigmented with highly conductive silvercoated copper flake. It is easy to use, with no let-down and no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It also bonds well to drywall and can be painted over with common architectural paints. 843WB is designed to reduce EMI/RFI interferences in architectural and electronic applications.

844WB is a one-part, clear, water-based ESD paint made from a high quality aliphatic polyester urethane latex. It adheres strongly to plastics, paints, metals, and many other surfaces. The cured coating is flexible, durable, and will not crack, chip or peel. This non flammable, low odor, low VOC coating is used in electronic assembly lines to protect against electrostatic charge build-up on tools, production conveyor and bumpers, assembly trays, workstation surfaces, and enclosures. 844WB can be applied by roller, brush, manual and selective spray equipment.

Nickel Conductive Pen 841AR-P pen dispenses an acrylic lacquer pigmented with conductive nickel flakes. The cured traces are durable and corrosion resistant. They adhere well to plastics and most electronic substrates. The traces are flexible, but the product works best on a smooth, flat, hard surface. The valve tip opens when pressed against the surface, and the flow is controlled by squeezing the barrel. This pen repairs damaged traces on keyboards, game controllers, remote controls, mixing boards, and PCBs. It also creates conductive traces for prototyping, hobbies, or maker projects. It is great for making small connections in or between circuits, such as jumpers, through-holes, bridges, and links. It can also be used to increase the surface area of contacts by painting the area around them. For applications requiring lower resistance, use the 842AR-P Silver Conductive Pen. For a more economical alternative, use the 838AR-P Carbon Conductive Pen.

Total Ground™ Carbon Conductive Spray Paint 838AR is an economical conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive carbon powder. It is smooth, durable, and abrasion resistant. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It provides strong corrosion resistance and is suitable for use in marine environments. 838AR is excellent for creating grounded surfaces and in low frequency RFI shielding applications, such as pickup cavities on electric guitars. It is also perfect for shielding metal detectors and other devices where a metalfilled conductive paint would cause malfunction.

4223F-312G – Urethane Coating Spray 4223F-312G is a 1-part, heat curing, UL 746E certified, thermoset urethane (UR) conformal coating spray. It cures to a durable, flexible, scratch resistant and smooth finish. It is easy to apply and can be handled in 15 minutes. It cures in only 2 hours at 100 °C (212 °F). It may be removed with the right conformal coating remover (MG’s 8309 or 8310A) or soldered through for repair or rework. 4223F-312G is considered to be one of the best conformal coatings for protecting circuit boards in chemically challenging environments. It provides strong protection against aggressive chemicals, corrosion, moisture, fungus, dirt, dust, thermal shock, abrasion, short circuit, high-voltage arcing, and static discharge. This product is also available in liquid format. For acrylic conformal coating sprays, see 419D-340G or 419E-340G, and for silicone conformal coating sprays see 422B-340G or 422C-340G.

EMF Shielding Paint 841WB is a 1-part, water-based conductive paint, pigmented with highly conductive nickel flake. It is easy to use, with no let-down and no heat cure necessary. It can be applied by spray, brush or roller. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It also bonds well to drywall and can be painted over with common architectural paints. 841WB is designed to reduce EMI/RFI interferences in architectural, electric musical and electronics applications.

844AR is a 1-part, solvent-based, permanent electrostatic dissipative (ESD) coating. It adheres strongly to plastics, paints, metals, and many other surfaces. The cured coating is flexible, durable, and will not crack, chip or peel. The coating can be cured at room temperature or higher. 844AR is commonly used in electronic assembly lines to protect against electrostatic charge build-up on tools, production conveyor and bumpers, assembly trays, workstation surfaces, and enclosures.