Products

The 825 Glass Cleaner is an all-purpose, non-streaking, and high foaming action cleaner. It removes dusts, fingerprints, light oils, and residues, leaving surfaces bright and clean.

8309 is a liquid conformal coating stripper that readily removes most thermoplastic and non-cross linked coatings, such as acrylics, urethanes, and silicones based conformal coatings. It also facilitates the removal of some thermoset coatings, like cross-linked silicones and polyurethanes, by softening or swelling the coat to aid with mechanical removal. This stripper is safe for most types of PCB components.

402C spray duster is a pressurized gas duster made with 100% HFO-1234ze which is non-flammable, non-conductive, moisture free, zero residue, and has a global warming potential of less than 1. Its powerful blast blows away microscopic dust, lint, and foreign particles. Recommended for use in home or office over 402A.

The 824 Isopropyl Alcohol (IPA) is a high purity cleaner and solvent. The purity level meets Grade A standard for MIL Spec TT-I-735A and ASTM D770, ensuring that no contamination occurs from its use. As a cleaner, it is fully miscible in water and most organic fluids, making it good at dissolving dirt, light organic contaminants, and ionic flux residues. Since the 824 is highly anhydrous (without water) and hygroscopic (absorbs humidity), it readily scavenges water off surfaces, trapping the water in the IPA solution as an azeotropic mixture. This helps to dehumidify surfaces. As a solvent, it acts as a moderate evaporation, ‘plastic safe’ diluent (see compatibility chart on page 3) and is used to improve the properties of paint resins and other heterogeneous solid mixtures. Therefore, it serves as a useful carrier solvent to adjust the rheological properties and compatibilities of complex mixtures. Due to IPA’s volatility, it resists entrapment in the coating. As it dries, it gives off a very light odor, which is not bothersome but serves as a cue to limit over-exposure due to poor ventilation.

8309 is a liquid conformal coating stripper that readily removes most thermoplastic and non-cross linked coatings, such as acrylics, urethanes, and silicones based conformal coatings. It also facilitates the removal of some thermoset coatings, like cross-linked silicones and polyurethanes, by softening or swelling the coat to aid with mechanical removal. This stripper is safe for most types of PCB components.

8361A-P label and adhesive remover pen applies a solvent that soaks through labels to dissolve the adhesive backing, releasing the label. It can then be used to quickly clean up adhesive residues left behind. It can also be used to remove some inks and cured adhesives.

8361 Label and Adhesive Remover is formulated to effectively remove adhesive, sticker, and ink residues. It contains a pleasant odor which makes the product easy to work with.

8310A is a conformal coating stripper that readily removes most thermoplastic and on-cross linked coatings such as acrylics, urethanes, and silicones based conformal coatings. It also facilitates the removal of some thermoset coatings like cross-linked silicones and polyurethanes by softening or swelling the coat to aid with mechanical removal. This stripper is safe for most types of PCB components.

408C restores old rubber parts that have become hard and lost their tackiness and flexibility. It causes the rubber to expand, allowing dirt to be removed from its pores. When the solvent dries, the rubber returns to its form and remains tacky. This product restores the tackiness of platens and rollers as well as helping remove dirt, ink, and sticky residues. It may also restore the flexibility of belts, conveyors, and seals.

The 826 Static Off™ Antistatic Foaming Spray has non-drip formulation that effectively polishes and eliminates static charges with a single application. The spray is safe on all surfaces and gives a streak-free finish for improved optical clarity and distortion-free reading.

The 408A Rubber Renue™ restores old rubber parts that have become hard and lost their tackiness and flexibility. It causes the rubber to swell, allowing dirt to come out of its pores. When the solvent dries, the rubber returns to its form and remains tacky, allowing rollers and platens to retain their grip.

The 4351 Thinner 1 is a mild diluent designed for MG Chemical’s EMI/RFI shielding products.

The 402A Super Duster™ 134 is a pure, non-flammable duster that can be used on live electronic and electrical equipment. The duster contains pure 1,1,1,2-tetrafluoroethane (HFC 134a), which delivers a constant, high-pressure cleaning jet. The gas jet is dry, low-residue, and chemically inert, which makes it safe for cleaning electrical and electronic components. The 402A duster is ideal for removing lint, dust, and other debris from printed circuit boards, electronic devices, and computers. It helps prevent malfunctions and lengthens component life.