Products

ProHere® E 00017 is developed for anti-corrosion primers and pre-treatment sealers for metallic substrates providing excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents.

Michem® Lube 180 provides slip, release and anti-blocking properties in a number of applications from wood coatings to synthetic and natural lattices. It also provides mar and scratch resistance and water repellence in varnishes and other coatings.

Michelman Wax Dispersion 40 aids in water repellency and provides some slip and release properties in solvent applications. It is most effective when used in formulations for deck, architectural, and industrial coatings.

Michem® Lube 156 - A wax emulsion provides scratch resistance, lubricity, release, and anti-block properties in auto polishes, cosmetics, paints, coatings, and graphic arts.

Michem® Dispersion Urethane 4075 is an APE free product that provides excellent abrasion resistance, water resistance, and high flexibility for floor coatings and parquet lacquers. This product can be used as a one component as well as a two component systems.

Michem® Lube 160RPH is APEO-free and formaldehyde-free slip additive made from renewable materials allowing to control the coefficient of friction. This additive enters the formulation of acrylics, PVdC and Michelman low temperature heat seal coatings without affecting bond strength, printability and barrier properties of the coatings. Michem® Lube 160 RPH fully complies with FDA and EU food contact regulations.

Michem® Lube 270R provides excellent water and block resistance in paint and coating formulations. This product is useful for long term water bead and for water repellency on wood as well as a tire dressing and buffability for auto care.

Michem® Prime 4990R provides outstanding adhesion to both metallic and cellulosic substrates and enhances the water, grease, oil, and solvent-resistance of coatings and adhesives. It can serve as a tie coat or primer for extrusion coatings, a foil laminate, specialty paper coating, paper sizing agent, heat sealable coating, and a nonwoven binder, and used as a thermally active binder in thermal transfer release coatings.

Michem® Emulsion 95535 - A phenol free additive best used in water based coatings where improved slip, rub resistance, hardness and/or block resistance is needed. It has proven to be very effective for mar resistance in floor polish formulations as well as mar resistance and shine in car polish formulations.

ProHere® E 00002 is designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents.

Michem® Emulsion 94340 - A phenol-free additive is best used in floor polish and overprint varnish formulations when a high degree of slip resistance is needed. It also provides durability and scratch resistance to wood applications.

Michem® Emulsion 93335 enhances anti-blocking, slip properties and mar resistance and is used most effectively for wood coatings,inks and overprint varnishes.

Michem® Emulsion 93235 - A phenol-free additive best used in water-based coatings where improved slip, rub resistance, hardness, or block resistance is needed. It provides effective mar resistance in floor polish formulations, and shine and mar resistance in auto polish formulations.

Michem® Emulsion 47950 is effective as a sacrificial anti-graffiti coating and can also contribute water and corrosion resistance to industrial and wood coatings. This product also provides lubricity and serves as a mold release for industrial molding applications.

Michem® Prime 4983R provides outstanding adhesion to both metallic and cellulosic substrates and enhances the water, grease, oil, and solvent-resistance of coatings and adhesives. It can serve as a tie coat or primer for extrusion coatings, a foil laminate, specialty paper coating, paper sizing agent, heat sealable coating, and a nonwoven binder, and used as a thermally active binder in thermal transfer release coatings.

Michem® Wood Coating 44 penetrates deep into wood substrates this user-friendly, water resistant topical wood treatment provides good water beading and swell resistance with lower VOC for exterior wood decks, fences, and garden sheds. Michem® Wood coating 44 produces a natural surface appearance and is particularly suitable for softwood as well as extending the look and use of outdoor wood furniture.

ProHere® L 90101 imparts lubricity to metal coatings.

Michem® Lube 743G exhibits a high degree of water resistance and block resistance this product is used in many water based coating applications.

Michem® Emulsion 36840 improves water resistance, mar resistance and anti-block properties in paints and coatings.

Michem® Emulsion 93935 - A phenol and formaldehyde-free additive imparts black heel resistance, toughness, buffability, and mar and scuff resistance for floor polish formulations. It also imparts durability, block, mar and scratch resistance in paint and varnish formulations.

Michem® Lube 124 - A wax emulsion provides release and acts as a detackifier for industrial molding applications and latex glove formulations, and offers slip resistance for adhesives and sealants.

ProHere® L 90900 imparts lubricity to metal coatings and presents food contact compliance.

Michem® Emulsion 43040 is effective in providing a high degree of slip resistance in wood and overprint varnish formulations. It also provides lubricity and mold release for industrial molding applications.

ProHere® E 00004 is designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents.

ProHere® L 90104 imparts scratch and abrasion resistance to metal coatings, as well as anti-slip properties.

ProHere® E 00003 is designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents.

Michem® Emulsion 71150 - A stable high solids water-resistant additive for coatings effectively controls concrete curing and provides donnability and release for industrial molding applications.

ProHere® E 00006 is designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents.

ProHere® L 90006 imparts lubricity to metal coatings.

Michem® Emulsion 98040M1 is used to provide superior slip, abrasion resistance and antiblock properties in paint, varnish, and wood applications.

Michem® Lube 160 PFP - A phenol-free additive provides slip and anti-block properties when used in coatings for seeds, metal, wood and OPP films.

Michem® Dispersion Urethane 440 is a development that provides chemical, abrasion, and scratch resistance for pigmented floor coatings and parquet lacquers.

Michem® Guard 200 - An aqueous dispersion for interior and exterior wood varnishes, decreases gloss while improving abrasion resistance, slip, and anti-blocking for cabinetry, furniture, and floor applications.

ProHere® E 00001 is designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents.

ProHere® I 13001 is designed for metal coatings that need to deal with extremely high temperatures. It provides good adhesion, very high chemical resistance, very high mechanical strength and excellent high temperature resistance.

Michem® Emulsion 91735 - A sizing polymer for fiberglass and other fibers used to reinforce polypropylene. It can also be used in paint & varnish and polish applications to impart durability, mar, slip and block resistance.