Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Product Type
- Soap and Scum Remover
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Recommended Uses
This product is recommended for use as a rinse for all types of floors, removing alkali buildup on masonry surfaces, washroom sanitation, showers, cleaning stainless steel, formica, painted surfaces and other hard surfaces and to remove ice melt compound.
- Directions
Note: Do not use on unsealed marble or terrazzo unless tested at use dilution in an inconspicuous area to determine if staining or other damage occurs.
- To remove detergent residue, soap film, hard water salts, and floor finish residue after stripping, use 4 ounces per gallon of water. Machine scrub lightly with proper pad. Rinse with clear water and let dry before applying floor finish.
- For removal of ice melt compound residue, use 4 ounces per gallon of water. Damp mop floor with solution and let dry.
- For general cleaning of stainless steel, formica, etc., use 4 ounces per gallon of water. Apply to surface with a sponge or cloth. Rinse with clear water if necessary.
- For use on masonry surfaces use 8 ounces per gallon of water. Machine scrub with proper pad, pick up solution and rinse with clear water.
- For initial cleanup of washroom and shower areas with heavy accumulations of soap film and hard water residue, mix at a ratio of 1 to 1.
- For normal maintenance use 8 ounces per gallon of water. Apply with sponge or sprayer and allow solution to "work" 5 to 10 minutes. Scrub with bristle brush and rinse with clear water.
Properties
- Physical Form
- Odor
- Mild
- Miscible in
- Water
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Weight per Gallon | 8.95 | lbs. | — |
| Solid Content | 10.8 - 11.8 | % | — |
| Viscosity (Gardner-Holdt Tube) | max. A-1 | — | — |
| Freeze/Thaw Stability | Passes 3 Cycles | — | — |
| pH (4 oz. per gal.) | 10.91 | — | — |
| Coverage (4 oz./gal.) | 13200.0 | sq. ft. per gal. | — |
Regulatory & Compliance
- Chemical Inventories
Safety & Health
- Warning
Causes serious eye irritation.
Wear eye protection. Wash contaminated body part thoroughly after handling.
First Aid
- If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- If eye irritation persists: Get medical attention. If on skin rinse thoroughly with water.
- If swallowed, give two glasses of water. Do not induce vomiting. Seek medical attention.
Keep out of reach of children. For industrial & institutional use only.
Packaging & Availability
- Packaging Type
- Packaging & Availability
Stock No. Pack Case Weight M134
55 Gals 517 lbs 5 Gals 48 lbs 4 x 1 Gal 39 lbs