Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
- DOT Classification
Paint and Related Material NOIBN Protect from Freezing
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Unique Advantages
- No pot life restriction
- Exceptional self-sealing
- High solids and excellent leveling
- High performance and chemical resistance per KCMA and AWI
- Very good color stability and color fastness ensures even and repeatable color space
- Ready-to-spray formula with little to no reduction required
- Available in Super Flat (Clear), Flat (White), Dull, Satin and Gloss clear and white/opaque bases.
Applications & Uses
- Markets
- Application Area
- Application Method
- Uses
For use on kitchen and bathroom cabinets, dormitory, household, and office furniture. Also, for use on toys, paneling, and display fixtures.
- Application
Application Procedure
All surfaces should be well sanded. Scuff sanding between coats is necessary. Remove all sanding dust before proceeding with finishing. Always agitate thoroughly before application. Wet mil film application should be 3 to 5 mils per coat. The second or third coat should be applied after complete drying of the previous coat. Sand between coats using 320 sandpaper. Always sand just prior to recoating. The total dry film build should be at least 3 mils and should not exceed 5-6 dry mils.
Note: Hot spray application is not recommended. If hot spray equipment is used, temperature settings should never be over 110°F or 43°C. Apply using only stainless steel or plastic spray equipment. If aluminum equipment is used, some oxidation may occur. Before application material, surface and air temperatures should be a minimum of 65°F or 18°C.
Equipment Clean Up
- All equipment should be flushed with warm water immediately after use.
- A subsequent flush with alcohol will insure all moisture is removed from the system.
Surface Preparation
- New Work: Remove any dirt, grease or other construction contamination from surface. Sand wood as required. No sealer is required.
- Old Work: Remove any dirt, grease, or other contamination from surface. Sand well to improve adhesion.
Reduction
ARROYO® 1K Waterborne Clear Topcoat Tint Base does not require reducing but can be thinned with distilled water (use very small amounts at a time). Thinning should be limited to 3%. Over thinning can cause sags due to high solids content of product.
Caution
- THESE PRODUCTS ARE DESIGNED FOR PROFESSIONAL USE ONLY.
- Use only after all safety information is understood.
- Refer to the Safety Data Sheet (SDS) or Material Safety Data Sheet (MSDS) for additional information.
Notes
The information, rating, and options stated here pertain to the material currently offered and represent the results of tests believed to be reliable. However, due to variations in customer handling and methods of application that are not known or under our control, M.L. Campbell cannot make any warranties as to the end result. Thank you for using M.L. Campbell Wood Finishing products.
Properties
- Physical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Weight Per Gallon | 8.50 - 9.0 | lbs/gal | - |
| Viscosity (Ford #4 At 77°F) | 25 - 35 | ” Ford 4 | - |
| Solids by Weight | 29.04 - 35.04 | % | - |
| Solids by Volume | 24.86 - 30.86 | % | - |
| Theoretical Coverage (At 1 Mil Dry) | 490 - 520 | sq. ft. per gallon | - |
| Flash Point | Not Combustible | - | PMCC |
| Sheen (Super-Flat) | 2 - 7 | - | 60° Glossmeter |
| Sheen (Dull) | 13 - 17 | - | 60° Glossmeter |
| Sheen (Satin) | 33 - 27 | - | 60° Glossmeter |
| Sheen (Gloss) | 80+ | - | 60° Glossmeter |
| Packaged VOC | 120 - 131 | g/l | - |
| Volatile HAPS (lbs/lbs of solids) | 0.0 | lbs/lb | - |
| Photochemically Reactive | No | - | - |
| Value | Units | Test Method / Conditions | |
| Dry to Touch (At 77°F) | 20 - 25 | minutes | - |
| Sanding Dry (At 77°F) | 30 - 45 | minutes | - |
| Stacking Dry (At 77°F) | 6.0 - 8.0 | hours | - |
Regulatory & Compliance
- Compliance
Arroyo is GREENGUARD® certified for low indoor emissions and VOC. Arroyo passes all KCMA tests and AWI System 2, Precatalyzed Lacquer and System 8, Water Base Acrylic Cross-Linking chemical and moisture resistance tests.
Packaging & Availability
- Packaging/Shipping
- Available Units: Gallons and Pails.
- Shipping Caution: Restrictions for shipments of freezable materials.
Storage & Handling
- Shelf Life and Storage
- Protect from freezing and other extreme temperatures. Product does pass freeze/thaw stability test but must be checked before use to ensure quality.
- Store in airtight containers.
- Shelf life is 18 months.