MOLYDAL

Luba Luba 216 AL is a cold forming chlorine-free fluid. Designed to replace solvented oils and mineral based fluids. Made from vegetal synthetic esters, it possesses an outstanding wetting power allowing better parts finishings and longer tools lifetime. Leaves a thin non-carbonizing greasy film fully thermo-degradable (ATG curve available on request). Does not leave any traces nor residuals.

Luba Luba 21 is a cold forming chlorine-free fluid. Designed to replace solvented oils and mineral based fluids. Made from vegetal synthetic esters, it possesses an outstanding wetting power allowing better parts finishings and longer tools lifetime. Leaves a thin non-carbonizing greasy film fully thermo-degradable (ATG curve available on request). Does not leave any traces nor residuals.

Molydal H 125 AL is a high-viscosity mineral oil for direct and indirect contact with foodstuffs. It can be used on all metals and compatible with most elastomers and plastic materials and for cutting or light stamping operations for the manufacture of parts intended for the food processing industries.

Molydal HYDRO 32 AL are white oil, odorless, used for the lubrication of hydraulic systems. The nature of the basic oils assures an outstanding ratio viscosity / temperature and high resistance to oxidation and aging. The natural properties of basic oils are reinforced by appropriate and outstanding anti-oxidant, anti wear and rust preventive additives.

Molydal H VG which is a clean and general-purpose lubricant recommended for mounting operation, cutting or light stamping in all fields of activities in the food industry. It is free from silicone, allergen, GMO and can be used on all metals and plastics.

Molydal HCB 400 is chlorine-free and with extreme pressure and high anti-wear characteristics which allow increasing the tool’s service life. Which is a lubricant especially designed for all grinding operations by micro-spraying. It lowers cutting liquid consumption reduces tool wear or breakage and makes not oily chip recovery easier.

Molydal HR 460 AL is an extreme pressure mineral oil with an EP oil base, phospho-sulphured without lead and anti-wear additives. Which reinforced chemical stability and resistance to oxidation for severe conditions (pressure, temperature).

Molydal HCB 300 is chlorine-free and with extreme pressure and high anti-wear characteristics which allow increasing the tool’s service life. Which is a lubricant especially designed for all grinding operations by micro-spraying. It lowers cutting liquid consumption reduces tool wear or breakage and makes not oily chip recovery easier.

Molydal HR 100 AL is an extreme pressure mineral oil with an EP oil base, phospho-sulphured without lead and anti-wear additives. Which reinforced chemical stability and resistance to oxidation for severe conditions (pressure, temperature).