Products

Addisil™ 8101 silicone adhesive is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures.Addisil™ 8101 is a gray thixotropic materialKey Features and Benefits One component product - no mixing required Room temperature storage Very fast cure at elevated temperature (in a range of 110°C to 230°C) Primerless adhesion to many types of substrates (e.g. PBT, PA, phenolic resins, copper, nickel, aluminum, stainless steal, brass, ceramic and glass) No formation of cure by-products; low linear shrinkage Non-corrosive to metals and sensitive substrates Excellent dielectric properties Outstanding performance over a wide temperature range Service temperature -50°C to 250°C.

Silplus™ 60 EX is a heat cured silicone rubber base compound that is an excellent candidate to consider for use in extrusion, press-molding injection and calendaring. Silplus™ 60 EX heat cured silicone may be considered for use in a wide variety of high quality applications such as high durometer tubes and profiles.Key Features and Benefits excellent extruding processability good mechanical properties high green strength easily blendable versatile Potential ApplicationsBecause of its outstanding properties, Silplus™ 60 EX heat cured silicone is an excellent candidate to consider for use in most types of extrusion and calendaring applications.

Addisil™ 6300 silicone coating is a one-component heat curable silicone coating, which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures.Addisil™ 6300 is a white, flowable material, which can be applied on a textile by knife over roll.Compliance with FDA regulationsKey Features and Benefits One component product - no mixing required Room temperature storage Fast cure at elevated temperature (in a range of 140 °C to 230 °C) Primerless adhesion to many types of substrates No formation of cure by-products Non-corrosive to metals Good performance over a wide temperature range.

Addisil™ 6100 silicone adhesive is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures.Addisil™ 6100 is a black, thixotropic paste, which can be applied to vertical or overhead surfaces.Key Features and Benefits One component product - no mixing required Room temperature storage Fast cure at elevated temperature (in a range of 140 °C to 230 °C) Primerless adhesion to many types of substrates (e.g. glass, enamel, aluminum, ceramic) No formation of cure by-products Non-corrosive to metals Good performance over a wide temperature range Service temperature -50 °C to 250 °C.

Addisil™ 6101 Momentive Performance Material's Silicone adhesive is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures.Addisil™ 6101 silicone adhesive is a black, thixotropic paste, which can be applied to vertical or overhead surfaces.Key Features and Benefits One component product - no mixing required Room temperature storage Very fast cure at elevated temperature (in a range of 110°C to 230°C) Primerless adhesion to many types of substrates (e.g. aluminum, copper, stainless steel, glass, enamel, ceramic) No formation of cure by-products; low linear shrinkage Non-corrosive to metals and sensitive substrates Outstanding performance over a wide temperature range Service temperature -50°C to 250°C.

The Addisil™ 480 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

Addisil™ 160 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 70 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacturing.

Silplus™ 60 MP is a heat cured elastomer with outstanding processing capability. Silplus™ 60 MP heat cured elastomer when properly compounded and catalyzed may be considered for use in a wide variety of applications such as extrusion, molding and calendaring.Key Features and Benefits compounding simplicity good extrudability high mechanical properties good green strength easily blendable versatile Potential ApplicationsBecause of its outstanding properties, Silplus™ 60 MP heat cured elastomer is an excellent candidate for most types of molding, extrusion and calendaring applications.

InvisiSil™ IVS4632 is a two-component, addition cure silicone rubber designed for optical device coating. This product cures with heat to an elastomer.Key Features and Benefits Low viscosity allows for excellent flowability Excellent transparency Convenient 1:1 mix ratio by weight Cures fast with heat and adheres to parts Potential Applications Coating and potting of optical device.

Silplus™ 70 MP is a heat cured elastomer with outstanding processing capability. Silplus™ 70 MP heat cured elastomer when properly compounded and catalyzed may be considered for use in a wide variety of applications such as extrusion, molding and calendaring.Key Features and Benefits compounding simplicity good extrudability high mechanical properties good green strength easily blendable versatile Potential ApplicationsBecause of its outstanding properties, Silplus™ 70 MP heat cured elastomer is an excellent candidate to consider for use in most types of molding, extrusion and calendaring applications.

InvisiSil™ IVS4622 is a two-component, addition cure silicone rubber designed for optical device coating. This product cures with heat to an elastomer.Key Features and Benefits Low viscosity allows for excellent flowability Excellent transparency Cures fast with heat and adheres to parts Convenient 1:1 mix ratio by weight High Purity Shore A 60 Potential Applications Optical device coating.

Silopren™ HV 6/600 is a heat cure silicone rubber base compound, which is suitable for press-, injection-molding and extrusion.Silopren™ HV 6/600 is developed especially for the manufacture of articles with good resistance to the exposure of steam. It is suitable in particular for the production of steam pot gaskets, gaskets in autoclaves etc.Key Features and Benefits Increased steam resistance Low compression set Good rebound resilience Silopren™ HV 6/600, the ingredients used to formulate this product are compliant with 21 CFR 177.2600 "Rubber articles intended for repeated use" and BfR recommendation XV "Silicone".

Silplus™ 40 MP is a heat cured elastomer with outstanding processing capability. Silplus™ 40 MP heat cured elastomer when properly compounded and catalyzed may be considered for use in a wide variety of applications such as extrusion, molding and calendaring.Key Features and Benefits compounding simplicity good extrudability high mechanical properties good green strength easily blendable versatile Potential ApplicationsBecause of its outstanding properties, Silplus™ 40 MP heat cured elastomer is an excellent candidate to consider for use in most types of molding, extrusion and calendaring applications.

The Addisil™ 472 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.

The Addisil™ 452 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.

TheAddisil™ IND 2060 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

Addisil™ 2050 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations KTW: German Water Regulation. A representative sample has passed the test for tubes, fittings, seals and strorage systems (cold and warm) WRAS (BS 6920). A representative sample has passed the test (cold and warm) W270: Microbiological growth test. A representative sample has passed the test.

Silplus™ 30 AS, 30 duro hardness heat cured silicone rubber compound for compression molding processes, offers a good anti-static property to silicone rubber products.Key Features and Typical Benefits Good anti-static property Colorable translucent appearance Excellent mechanical properties and heat resistance Excellent processability Easy coloring Potential Applications Mobile jacket, keypad cover, keypad watch Consumer goods, novelty, accessory Industry roller, rubber sheet Automobile parts.

InvisiSil™ IVS4312 is a two-component, addition cure silicone rubber designed for optical device coating. This product cures with heat to an elastomer.Key Features and Benefits Low viscosity allows for excellent flowability Excellent transparency Convenient 1:1 mix ratio by weight Cures fast with heat and adheres to parts Potential Applications Coating and potting of optical device.

The Addisil™ IND 1070 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

The Addisil™ 442 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.

The Addisil™ IND 1050 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

Silplus™ 70 HS is a heat cured elastomer with very good mechanical and processing properties. Silplus™ 70 HS when properly compounded and catalyzed can be considered for use in a wide variety of applications such as extrusion, molding and calendaring.Key Features and Benefits excellent mechanical properties, in particular, high tear strength compounding simplicity good dielectric properties enhanced heat resistance versatile Potential ApplicationsBecause of its outstanding properties, Silplus™ 70 HS heat cured silicone is an excellent candidate to consider for use in most types of molding, extrusion and calendaring applications.

Silplus™ 60 HS is a heat cured elastomer with very good mechanical and processing properties. Silplus™ 60 HS when properly compounded and catalyzed can be considered for use in a wide variety of applications such as extrusion, molding and calendaring.Key Features and Benefits excellent mechanical properties, in particular, high tear strength compounding simplicity good dielectric properties enhanced heat resistance versatile Potential ApplicationsBecause of its outstanding properties, Silplus™ 60 HS heat cured silicone is an excellent candidate to consider for use in most types of molding, extrusion and calendaring applications.

Silplus™ 70 CW is a heat cured silicone rubber base compound that is an excellent candidate to consider for use in the cable and wire industry.Key Features and Benefits excellent processing (high green strength) good mechanical profile very good electrical properties enhanced high temperature resistance Potential ApplicationsBecause of its outstanding properties, Silplus™ 70 CW heat cured silicone is an excellent candidate to consider for use in most types of cable and wire applications.

The Addisil™ IND 2050 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

InvisiSil™ IVS4542 is a two-component, addition cure silicone rubber designed for optical device coating. This product cures with heat to an elastomer.Key Features and Benefits Low viscosity allows for excellent flowability Excellent transparency Convenient 1:1 mix ratio by weight Cures fast with heat and adheres to parts Potential Applications Coating and potting of optical device.

The Addisil™ 2080 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations KTW: German Water Regulation. A representative sample has passed the test for tubes, fittings, seals and strorage systems (cold and warm) WRAS (BS 6920). A representative sample has passed the test (cold and warm) W270: Microbiological growth test. A representative sample has passed the test.

The Addisil™ 450 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

The Addisil™ 440 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

Silplus™ 50 MP is a heat cured elastomer with outstanding processing capability. Silplus™ 50 MP heat cured elastomer when properly compounded and catalyzed may be considered for use in a wide variety of applications such as extrusion, molding and calendaring.Key Features and Benefits compounding simplicity good extrudability high mechanical properties good green strength easily blendable versatile Potential ApplicationsBecause of its outstanding properties, Silplus™ 50 MP heat cured elastomer is an excellent candidate to consider for use in most types of molding, extrusion and calendaring applications.

Addisil™ 2060 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations KTW: German Water Regulation. A representative sample has passed the test for tubes, fittings, seals and strorage systems (cold and warm) WRAS (BS 6920). A representative sample has passed the test (cold and warm) W270: Microbiological growth test. A representative sample has passed the test.

The Silopren™ Electro 1700 are one-component heat curable rubber materials for making elastomers (HCE) with a hardness of 70 and 77 Shore A. These silicone rubbers are based on a platinum cure system, especially developed for the manufacture of housing and weather sheds for all kinds of insulators.Key Features and Benefits One-component, ready to use Fast vulcanisation/addition curing system Outstanding aging behavior and weather resistance Fast hydrophobicity transfer and hydrophobicity recovery Excellent dielectric behavior over a wide range of temperatures Very good tracking resistance- Shelf life of 3 months from date of manufacturing.

Silplus™ 60 CW is a heat cured silicone rubber base compound. It is an excellent candidate to consider for use in the cable and wire industry.Key Features and Benefits excellent processing (high green strength) good mechanical profile very good electrical properties enhanced high temperature resistance Potential ApplicationsBecause of its outstanding properties, Silplus™ 60 CW heat cured silicone is an excellent candidate to consider for use in various types of cable and wire applications.

The Addisil™ 482 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.

Addisil™ 6210 silicone adhesive is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures.Addisil™ 6210 is an off white one component thixotropic material.Key Features and Benefits One component product - no mixing required Room temperature storage Fast cure at elevated temperature (in a range of 140°C to 230°C) Primerless adhesion to many types of substrates (e.g. glass, enamel, aluminum, ceramic) No formation of cure by-products Non-corrosive to metals Good performance over a wide temperature range Service temperature -50°C to 200°C.