Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Feature
Asbestos free
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Material Preparation
Do not thin this product.
- Limitations
- Urethane foam may be warped by water based material.
- Test before using.
- Keep from freezing.
- Do not apply below 50ºF.
- Application
This product is for industrial use only. It should be applied by trained and qualified craftspeople. Use clean equipment. Spray equipment should be stainless steel construction. Apply adhesive in an even coat to both surfaces. Allow to dry before bonding. When dry, align the coated surfaces and press firmly together.
- Clean Up
Warm soapy water or Trichloroethylene.
- Coverage
200 sq.ft./gal. of surface to be adhered. The coverage rate is dependent on the surface being covered and the application method.
Properties
- Physical Form
- Typical Properties
- Bonding Time
The adhesive must be dry before bonding. The adhesive is dry when the color changes from white to clear. It usually takes one half hour, but this depends on ambient conditions. After drying you have a bond time of one (1) hour.
| Value | Units | Test Method / Conditions | |
| Service Temperature | -10 to 325 | °F | - |
| Weight | 9.6 | lbs/gal | - |
| Non Volatile (Average) | 73.0 | % by Weight | - |
| VOC | 0.0 | lbs/gal | - |
Regulatory & Compliance
- Certifications & Compliance
- Specification Compliance
- Complies with LEED v4 ID&C, BD&C
- Collaborative for High Performance Schools (CHPS) EQ 7.1.1
- California Dept. of Public Health (CDPH) Standard Method v1.2
- Criteria of MAS Certified Green® Program TVOC Emissions at 14 days, (Certificate Number MAS-1700746)
- Meets requirements for LEED® IEQ Credit 4.1: Low Emitting Materials: Adhesives & Sealants.
Safety & Health
- Caution
- Flammable mixture
- Red Label
- Do not use or store near heat, sparks or open flame.
- Use with adequate ventilation.
- Avoid prolonged or repeated breathing of vapor.
- Avoid prolonged or repeated contact with skin.
- Do not take internally. In an emergency, call a physician.
- Keep out of reach of children.
- Flammability
- Wet - Non-flammable. Water based
- Dry - Slow burning