Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Feature
Asbestos free
Applications & Uses
- Markets
- Application Method
- Limitations
- This product is not recommended for use with fiberglass or mineral wool insulation.
- The dry adhesive is soluble in water and should not be used where it is exposed to excessive moisture.
- Keep from freezing.
- Spot test compatibility with painted or primed surfaces.
- Application
- This product is for industrial use only by trained and qualified craftspeople.
- Do not thin.
- 22-30 - Use clean paint brush and apply the adhesive evenly. Immediately press pieces, to be bonded, together.
- 22-31 - Use a clean steel trowel and apply evenly at the recommended coverage. Immediately, firmly press the insulation in place.
- Clean Up
Fresh, clean water.
- Coverage
- 22-30 – 40 to 50 sq.ft./gal.
- 22-31 – 25 to 30 sq.ft./gal.
- The coverage rate is dependent on the surface being covered and the application method.
Properties
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Service Temperature | 0 - 800 | °F | - |
| Weight (22-30) | 13.5 | lbs/gal | - |
| Weight (22-31) | 14.3 | lbs/gal | - |
| Non Volatile (Average, 22-30) | 56.0 | % by Weight | - |
| Non Volatile (Average, 22-31) | 61.0 | % by Weight | - |
| Bonding Time (Depend on Temperature, Humidity, Film Thickness) | 0 - 5 | min | - |
| VOC (22-30) | max. 0.42 | lbs/gal | - |
| VOC (22-31) | max. 0.37 | lbs/gal | - |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Caution
- Sodium Silicate.
- Skin and eye irritant.
- Avoid contact with skin and eyes.
- If contacted, flush with plenty of fresh clean water.
- If ingested it will cause discomfort. Call a physician.
- Keep out of reach of children.
- Flammability
- Wet - Non-Flammable
- Dry - Incombustible