Knowde Enhanced TDS
Identification & Functionality
- Technologies
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Application Method
- Compatible Substrates & Surfaces
- Limitations
- Do not store at temperatures over 120º F.
- Do not store directly on concrete floor.
- Not recommended for bonding of expanded polystyrene, flexible plastics, plasticized vinyls, or high pressure laminates. Test compatibility before using.
- Application
This product is for industrial use only. It should be applied by trained and qualified craftspeople. Be sure surfaces are clean and dry before application. When bonding insulation to itself or sheet metal apply 22-38 to the surface in a uniform pattern. Press the insulation firmly in place. There is adequate open time for normal shop procedures. After connecting the hose and gun assembly, confirm that all connections are tight. Keep the valve on the canister open and the hose pressurized. Do not close valve on canister until ready to connect hose to a new canister
- Clean Up
Non-Flammable solvent
- Coverage
Approximately 100 - 150 S/F Per Pound
Properties
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Service Temperature | -40 to 180 | °F | - |
| Specific Gravity | 86 - 89 | - | - |
| Bonding Time (Depend on Temperature, Humidity, Film Thickness) | 2 - 5 | min | - |
| VOC | max. 80 | g/l | EPA Method 24 |
Safety & Health
- Warning
- Use with adequate ventilation. Refer to (MSDS) Material Safety Data Sheet.
- Avoid prolonged or repeated breathing of vapor.
- Avoid prolonged or repeated contact with skin.
- Do not take internally. In an emergency call a physician.
- Keep out of reach of children.
- Flammability
Flammable, per industry standard flame projection test. Avoid open flames, sources of ignition high heat.