Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Feature
Asbestos free
Applications & Uses
- Markets
- Material Preparation
Do not thin. Stir well
- Limitations
- Keep from freezing
- Apply between 40ºF and 110º F.
- Application
This product is for industrial use only. It should be applied by trained and qualified craftspeople. Be sure surfaces are clean and dry. Apply the 22-68 to the sheet metal at a coverage rate of 500 sq. ft/gal. Press the insulation into place. Immediately install the mechanical fasteners.
- Clean Up
Wet - Clean, fresh water.
Dry - Hot, soapy water or chlorinated solvent.- Coverage
- 500 sq.ft/gal.
- The coverage rate is dependent on the machine setting.
Properties
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
Service Temperature | -20 to 180 | °F | - |
Weight | 9.0 | lbs/gal | - |
Non Volatile (Average) | 44.0 | % by Weight | - |
Bonding Time (Depend on Temperature, Humidity, Film Thickness) | 0 - 15 | min | - |
VOC (Less Water, Exempt Solvents) | max. 0.004 | lbs/gal | - |
Viscosity | 1000 - 2000 | cps | #6 at 50RPM RVT |
Regulatory & Compliance
- Certifications & Compliance
- Specification Compliance
- Complies with LEED v4 ID&C, BD&C
- Collaborative for High Performance Schools (CHPS) EQ 7.1.1
- California Dept. of Public Health (CDPH) Standard Method v1.2
- Criteria of MAS Certified Green® Program TVOC Emissions at 14 days, (Certificate Number MAS-1700746)
- NFPA 90A& 90B
- ASTM C916, Type I
- Meets requirements for LEED® IEQ Credit 4.1: Low Emitting Materials: Adhesives & Sealants
Safety & Health
- Caution
- Use with adequate ventilation.
- Avoid prolonged or repeated breathing of vapor.
- Avoid prolonged or repeated contact with skin.
- Do not take internally.
- In an emergency call a physician.
- Keep out of reach of children.
- Surface Burning Characteristics
Applied to Inorganic Reinforced Cement Board
USC CNC Flame Spread 10 10 Smoke Developed 0 0
Tested as applied at a coverage rate of 100 sq. ft/gal.
- Flammability
Wet - Non-flammable