Knowde Enhanced TDS
Identification & Functionality
- Chemical Name
- Base Chemicals Functions
- CAS No.
- 108-65-6
- EC No.
- 203-603-9
- Technologies
- Product Families
Applications & Uses
- Markets
- Applications
- Base Chemicals End Uses
- End Use Applications
- Solvent.
- Paints.
- Coatings.
- Inks.
- Electronics Manufacturing.
Properties
- Physical Form
- Empirical Formula
- C6H12O3
- Appearance
- Colorless Liquid
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Molecular Weight | 132.16 | g/mol | — |
| Freezing Point | -66 | °C | — |
| Flash Point (Closed Cup) | 42 | °C | — |
| Autoignition Temperature | 333 | °C | — |
| Boiling Point (760mmHg) | 146 | °C | — |
| Density (20°C) | 0.967 | kg/L | — |
| Evaporation Rate (nBuAc = 1) | 0.33 | — | — |
| Vapor Pressure (20°C) | 2.8 | mmHg | — |
| Solubility (In Water, 20°C) | 16 | % | — |
| Solubility (20°C (water in)) | 3 | % | — |
Safety & Health
- Health & Safety Information
- Under current U.S. OSHA's Hazardous Communication program PMAc is classified as a flammable liquid. Keep the material away from heat sources, hot surfaces, open flames, and sparks.
- Observe good industrial hygiene practices and use appropriate Personal Protective Equipment.
Storage & Handling
- Storage & Handling
- PMAc should be stored only in tightly closed, properly vented containers away from heat, sparks, open flame or strong oxidizing agents. Use only non-sparking tools. Containers should be grounded before beginning transfer. Electrical equipment should conform to national electric code. Handle empty containers carefully. Flammable combustible residue remains after emptying.
- Storage in properly lined steel or stainless steel to avoid slight discoloration from mild steel is recommended. Avoid contact with air when storing for long periods of time. This product may absorb water if exposed to air.
- Provided proper storage and handling precautions are taken, PMAc manufactured and delivered by Monument Chemical is stable for at least 12 months from the date of manufacture. PMAc that is subsequently repackaged, handled and/or delivered by third parties may have a different shelf life and may require third party shelf life studies. Product past the retest date should be evaluated to confirm that all specifications are within their limits before use.