Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- C2S1Te
- Light Weight
- Exceeds Iso 13007
- Non-slump
- Special Adhesive Properties
- Easy to mix & trowel
- Light weight
- Excellent coverage and high yield
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Suitable Substrates
- Concrete/Cement Render (Primed)
- Over Morgan Waterproof Membrane
- Compressed fiber sheet (Primed)
- Application On
INTERIOR/EXTERIOR
Walls SuperLITE can be used in any interior and exterior application
Floors - Precautions
SuperLITE is unsuitable for:
- Bonding to MDF board or timber & wax impregnated wood.
- Applications
Substrate Preparation & Expansion Joints
All substrates to be tiled must be flat and true, free from oil, dirt, grease or any other contaminants. Po-rous substrates should be primed with Morgan Universal Primer. Incorporate expansion joints in accordance with Australian Standards.
- Concrete: New concrete must be allowed to cure for 6 weeks and should have a wood float finish. Use Floor Prep to acid etch an adhesive key into concrete finished with a steel float.
- Cement Render: Render to be left with a wood float finish and allowed to cure for 7 days.
Mixing
Add SuperLITE to water at a ratio of 13.5kg to 6 - 7 liters of water. Mix the adhesive to a smooth paste free from lumps by using a drill that has a speed lower than 300 rpm, or mix by hand. Slacken the adhesive and re-mix after 5 minutes.
Open Time
SuperLITE has an open time of approximately 30 minutes, which can be shortened to just a few minutes by the action of sun, wind, high temperatures or highly absorbent surfaces. Dampening or priming the substrate prior to tiling prolongs the open time of the adhesive. Tilers need to constantly check that the adhesive has not formed a surface skin and is still fresh to touch. Adhesive with a surface skin must be removed and discarded.
Application, Tools And Adjustability Time
Always install the tiles in accordance with Austra-lian Standards and ensure the backs of the tiles are free of dust. Spread SuperLITE evenly across one square meter at a time with a 6mm notched trowel for walls and a 10mm notched trowel for floors. The choice of trowel should be governed by the depth of the knobs, grooves or ridges on the back of each tile.
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
Storage & Handling
- Pot Life
SuperLITE has a pot life of approximately 1 hour at 23°C and 50% relative humidity.