Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Reinforcement Form
- Reinforcement Material
- Composite Materials Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Quality Characteristics
- Good cutting properties especially on wide shearing equipments.
- Optimum dispersion of the roving skein in its single fibers.
- High mechanical strength of the final product.
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Composites Processing Methods
Properties
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Filament Diameter | 15.0 | µm | — |
| Nominal Fineness Roving Skein | 2400.0 | tex | — |
| Size Base | Silane | — | — |
| Linear Density (Skein) | 45.0 | tex | — |
| Bobbin Weight | 19.0 - 21.0 | kg | — |
| Glowing Loss | 1.025 | — | ISO 1887 |
| Moisture Content | 0.15 | % | ISO 3344 |
| Linear Density | 2400.0 | tex | ISO 1889 |
| Rigidity | 130.0 | mm | ISO 3375 |
Regulatory & Compliance
- Certifications & Compliance
- Regulation
The product is made of e-glass, marked as aluminum-borosilicate glass according to DIN 1259-1 and ASTM D 578.
Packaging & Availability
- Packaging Type
- Packaging and Labeling
The assembled roving is produced in the shape of a cylindrical bobbing with inside unwinding. The bobbins are single packed in foil. The product is delivered in cartons on a pallet. The inner and outer ends are ordered resp. connected according to the packing standards.
- Bobbin height - 255mm
- Outside diameter - 280mm
- Bobbins per pallet - 48 pieces, 64 pieces (20kg)
- Pallet - 950kg (size: 120 x 92 cm)
Single end, on request also continuous linkage (spliced or textile knot).
Storage & Handling
- Transport and Storage Conditions
- The product is transported in closed and moisture protected vehicles.
- The supply is effected with quality certificate.
- These products should be stored in original packaging in dry, roofed and dust-free warehouses.
- The recommended temperature is between 10°C and 30°C at a relative air moisture between 50% and 75%.
- Before working the products should be conditioned in original packing in the working area for at least 24 hours.
- The pallets may not be stacked if there are no other instructions on the packing.