Products

Muehlmeier E-CR glass - direct roving E-CR300 is drawn directly from the glass melting and wound to a roving bobbin without turn. It is characterized by a soft silane size that is especially recommended for winding and pultrusion. The silane size was optimized for the working with polyester, epoxy, phenol and vinyl ester resins. Compared to E-glass, E-CR glass has excellent chemical and thermal resistance and higher dielectric strength. Therefore the preferred uses are installations and containers for the chemical industry.

ThermoFlow® ThermoFlow® CS EC 10 672 is produced of silanized E-glass fibers. The recommended field of application is the production of PA6 resp. PA6.6 (nylon)- thermoplastic systems. Due to high fiber integrity a very good handling, extraction and dosage is guaranteed. The type ThermoFlow® 672 stands out for very high mechanical strength of the finished part.

StarStran® BMC cut fibers 991 CS EC 13 991 (51mm) long cut fibers are produced of E-glass fibers with fixed lengths. These short fibers LCF 991 are coated with a chemical size layer. The recommended field of application is carding /needling, air-laying process as well as the insulation of ovens. Resin-compatibility: PP, PA, polyester and further technical polymers.

Muehlmeier E-CR glass - roving assembled E-CR 13 2400 is wound to a roving bobbin (assembled) by consistent stress wound strands. The recommended field of application is reinforcement of molds which are produced in spraying process. The size is optimal adjusted to the working with polyester and vinyl resins. E-CR glass fibers unit the electrical and mechanical characteristics of E-glass with excellent chemical and thermal resistance. Further advantages are the high dielectric strength and good wear resistance at simultaneously very good mechanical specific values of the laminate.