Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Metalworking Fluid Type
- Fluids & Lubricants Functions
- Technologies
- Product Families
- Composition
Blend of special wax and mineral oil
Applications & Uses
- Markets
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- Applications
- Soluble oil petroleum based metalworking fluids
- Soluble oil vegetable based metalworking fluids
- Tank-side metalworking fluids
- Recommended levels/use
The properties and performance of a defoamer are greatly dependent upon the specific formulation in which it is utilized and, consequently, should always be tested (possibly at different treatment levels, temperatures, and/or time intervals) to verify performance prior to use. A starting dosage level from 0.1% to 0.5%, based on the weight of the formulation, tank-side starting at 100 ppm (add as needed), is recommended
Properties
- Appearance
- liquid
- Typical Properties
Value | Units | Test Method / Conditions | |
Active Ingredients | approx. 98.0 | % | — |
Consistency | approx. 2.500 | mPas/cps | — |
Density at 20°C | approx. 7.15 | lbs/gal | — |
Packaging & Availability
Storage & Handling
- Storage and Packaging
Always mix prior to use as the product tends to separate slightly Mix product and retest for quality after one year from the date of manufacture. The minimum shelf life in closed containers is 12 months from the date of manufacture.
Drums holding 360 lbs/ 163 kg net or 5 gallon pail holding 32 lbs/ 14 kg net.