Knowde Enhanced TDS
Identification & Functionality
- Fluids & Lubricants Functions
- Technologies
- Product Families
Features & Benefits
- Fluids & Lubricants Features
- Key Features and Benefits
- Polishes, seals and protects metal surfaces of internal, moving metal parts
- Lowers operating temperatures
- Frees valve body for optimum performance
- Eliminates governor hang-ups caused by contamination and surface spiking
- Keeps oil passages, orifices and ball checks clean and fully operational
- Extends transmission life by eliminating premature failure with improved lubrication
- Reduces metal particle fallout and debris caused by friction and wear
- Removes varnish build up
- Eliminates lock-up chatter in the torque converter
- Ensures proper shifts
- Safe for seals and gaskets
- Reduces costly comebacks
- Will not affect sprag or clutch friction
- Compatible with all petroleum fluids and most synthetics
- Lubrication technology based on tribologic methods that improve lubricity and loadcarrying capacity
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- Typical Applications
- Automatic transmissions
- Standard transmissions
- MT-10® Transmission can also be applied directly to parts during rebuild
- Directions for Use
- Automatic transmissions: Add 8 oz. of MT-10® to transmission fluid through the fluid tube. For larger transmissions, i.e. Allisons, add 1.5 oz. of MT-10® to each quart of fluid.
- Standard transmissions: Add 1 oz. of MT-10® per every pound of gear lube
Note: Not recommended for use in Constant Variable Transmissions (CVT) and CVT fluids. Use caution if adding to shared transmission and clutch fluid reservoirs. If the frictional plates of the wet clutch contain metal in the surface coating, MT-10® may cause clutch plate slippage due to the reduced friction.
Properties
- Physical Form
- Appearance
- Light amber liquid
- Odor
- Slight petroleum
- Insoluble in
- Water
- Typical Properties
| Value | Units | Test Method / Conditions | |
| API gravity (60°F) | -1.2 | — | D4052 |
| Density (15.5°C) | 1.0856 | g/ml | D4052 |
| Flash Point | 128.6 | °C | D93 |
| Four-Ball EP properties (LWI) | 246.0 | — | D2783 |
| Four-Ball EP (Weld Point) | min. 800 | Kg | D2783 |
| Freezing Point | -18.6 | °C | D2386 |
| Initial boiling Point | min. 148.9 | °C | D1120 |
| Lbs per gal (U.S.) | 9.059 | — | — |
| Pour Point | -30.0 | °C | D97 |
| Specific Gravity (60°F) | 1.086 | g/cm3 | D4052 |
| Timken Extreme Pressure OK Load | min. 60 | — | — |
| Vapor Pressure | max. 0.010 | psi | D5191 |
| Viscosity (100°C) | 12.61 | cSt | D445 |
| Viscosity (40°C) | 165.26 | cSt | D445 |
| Viscosity Index | 50.0 | — | D2270 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
- Container Availability
Item MT-10-8T- 8-oz. bottle (236 mL)