Power Cutting Oil PC-10 - Muscle Products

Knowde Enhanced TDS

Identification & Functionality

Product Type: Cutting Oils,
Fluid,
Metalworking Fluids
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Fluids & Lubricants
Metalworking Fluids

Features & Benefits

Ready-to-Use Product Features: Anti-Wear Properties,
Corrosion Resistant,
Extreme Pressure Performance,
Good Surface Finish,
Heat Resistance,
Service Life Extension
Key Features and Benefits: Reduces friction-related heat and wear for extended tool life.

Increases cutting speeds and production rates.

Provides more metal extraction per cut.

Improves surface finishes.

Reduces tool head and metal surface temperatures.

Causes less drag on the metal, reducing power consumption.

Excellent extreme-pressure properties.

Provides process visibility.

Inhibits rust and corrosion.

Can be used in a wide range of cutting and drilling applications.

Reduces unnecessary downtime and scrap caused by premature tool failure.

Contains no solid lubricants, active sulfur, sulfonated ash or chlorinated solvents.

Contains ionic bonding, lubricity enhancement and extreme-pressure agents that are activated in the cutting zone for continuous lubrication to the work and tool.

Contains Muscle Metal Treatment MT-10® technology for increased lubricity and boundary film lubrication.

Applications & Uses

Markets: Industrial
Applications: Industrial — Chemical & Industrial Manufacturing
Equipment & Parts
Application Area: Broaching Applications,
Drilling Applications,
Machining Operations,
Tapping Operations,
Threading Operations
Typical Applications: Full-strength, undiluted cutting oil.

Supplemental additive to insoluble oils to boost coolant performance.

Use in machining operations such as: broaching, drilling and deep drilling, threading and tapping, cutting, milling, shaving, sharpening, planing and shaping, turning and grinding.
Directions for Use: Use undiluted as a full-strength cutting oil

Add to the existing insoluble coolant in a 10-25% by volume ratio

Not recommended for use with water glycol compounds or triphenol butylated phosphate oils

Properties

	Value	Units	Test Method / Conditions
Density (15°C)	0.9946	g/ml	D4052
Flash Point	162.0	°C	D93
Initial Boiling Point	104.0	°C	D1120
Lbs per gal (U.S.)	8.3	-	-
Pour Point	-33.0	°C	D97
Rust Test (4hr)	Pass (no rust)	-	D665A
Specific Gravity (60°F)	0.9956	g/cm3	D1298
Timken Extreme Pressure OK Load	min. 60	-	-
Viscosity (100°C)	9.46	cSt	D445
Viscosity (40°C)	114.33	cSt	D445
Viscosity index	35.0	-	D2270

Regulatory & Compliance

Packaging & Availability