Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Features
Product Resistance to
- Fire
- Abrasion
- UV
- Salt
- Corrosion
Applications & Uses
- Applications
- Application Area
- Applications
- Application to sheetrock or other surfaces for isolation of RFID signals from adjacent areas.
- As an electrically conductive undercoating for a MagRAM RF absorber (like our MF-500 Urethane).
- Coverage : Nominally 200 ft²/gal (3.8L) using two “average” coats*
* In excess of 5 mils of thickness is required for adequate isolation of RFID signal. The number of coats needed to reach this thickness is dependent on application technique. Each situation will require testing to see if sufficient material has been applied and if the signal is adequately blocked.
Properties
- Color
- Mechanical Properties
- Typical Performance Properties
Value | Units | Test Method / Conditions | |
Nominal Thickness (Based on Application Technique) | 2 - 8 | mils/layer | — |
Dry Weight (for an area of 12"x 12") | 1.26 | gm/mil | — |
Value | Units | Test Method / Conditions | |
Nominal Isolation | 14 | dB/mil | — |