Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- SYN-LUBE Proves its Value
SYN-LUBE is also the best value on the market today. When compared with the price of our closest high-temperature competitor, the per ounce cost for SYN-LUBE is considerably less. Traditional PTFE lubricants are priced lower; however, the real value is found in comparing the lifespan of the lubricants and considering the additional cost of maintenance and downtime. SYN-LUBE remains on the surface longer, extending production up to ten times compared to that of PTFE lubricants. Further, SYN-LUBE has much greater shear stability than other lubricants. In laboratory and on-site tests, the change in penetration after 100,000 strokes is low—meaning the grease did not soften under shear. Both longer run times and greater shear stability mean less total product cost, less maintenance, and far less downtime for lubricating.
In addition, SYN-LUBE operates in a far wider range of temperatures than traditional lubricants, making it more versatile than PTFE products. In injection molding, SYN-LUBE has outlasted competitors in high-temp applications up to 500°F while increasing the run capacity before reapplication. For all practical purposes, you simply cannot purchase PTFE lubricants that will operate in this wide of a temperature range. Nanoplas, Inc. products represent the best of the best, offering both top quality and outstanding value. SYN-LUBE is no exception.
- Product Details
- Food-grade grease
- Outstanding extreme pressure protection.
- Very good water resistance.
- Excellent high temperature properties.
- Features and Benefits
- Staying Power: extraordinary adhesion extends production duration to 10 times that of other greases.
- Operating Temperatures: operates in a normal range from -40° F to 500°F.
- Corrosion Resistant: resists water, steam, acid, and other chemicals.
- High Dropping Point: maintains viscosity across full temperature range, returning to normal viscosity after cooling.
- Low Coefficient of Friction: lower than PTFE greases.
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- SYN-LUBE Application Instructions
- Clean and remove contaminants off of all components before applying Syn-Lube.
- Apply a small amount with a brush or hands. Spread and wipe off all excess with hands.
- Make sure you have a thin film on your wear surfaces.
- Install components and work back and forth. Remove components to wipe off extra grease at the end of travel.
Packaging & Availability
- Availability
SD-400-16JC – 16 oz. Jars (Case of 12)