Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Key Characteristics
- Medium-High fluidity
- Easy mold filling
- Short cycle times
- Good dimensional stability and high stiffness
- Food contact approval for specific applications (refer to NATPET)
- Special Features
Shows broad processing window while providing good mechanical properties
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Typical Applications
- Used for the production of thin-walled articles, containers, boxes, caps & closures, household articles and toys
- Components of compounding applications
Processing Methods
- Injection Molding
- Processing Conditions
Average extruder temperature range may be kept between 240- 260°C.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Density 23°C | 0.9 | g/cm³ | ISO 1183 |
Melt Flow Rate (MFR) 230°C/2.16 kg | 16 | g/10-min | ASTM D 1238-13 |
Flexural Modulus | 1550 | MPa | ISO 178 |
Tensile Stress at Yield 50-mm/min | 35 | MPa | ISO 527 |
Tensile Strain at Yield 50-mm/min | 13 | % | ISO 527 |
Heat Deflection Temperature 0.45 MPa Un-annealed | 175 | °C | ISO 75B |
Vicat Softening Temperature A50 (50°C/h 10N) | 155 | °C | ISO 306 |
Izod Notched 23°C | 3 | KJ/㎡ | — |
Regulatory & Compliance
- Food Regulations
This product is defined as a preparation under specific food contact regulation. Detailed information will be provided in a relevant document “Regulatory Compliances Product Declaration” upon request.
Storage & Handling
- Storage and Handling
Polypropylene resin should be stored to prevent a direct exposure to sunlight and heat. The Product estimated shelf life is one year starting from production date, adequate humidity below 80%, and temperature below 40°C. Customers might not fully follow the optimal storage condition, hence the shelf life recommended at customer site is six months only as received.