Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- No flushing required.
- Excellent adhesion and flexibility on most digital inkjet media.
- Consistent color density values.
- Chemically compatible with Mimaki SS21 ink.
- OEM color match to Mimaki™ SS21 inks, avoiding the need to profile when replacing these inks
- Low odor formulation.
- Improved resistance to alcohol, scratching and abrasion.
- Enhanced drying characteristics to accommodate faster print speeds.
- Long term exterior performance with proven resistance to the effects of UV degradation and color fading.
- High impact, high intensity colors equivalent to the original OEM ink set.
- Product Highlights
130 Series' Plug-n-Play capabilities allow users of Mimaki SS21 original ink or Nazdar 133 Series ink cartridges to change to Nazdar 130 Series ink without the need to flush. Due to the complete chemical and color compatibility of the two ink sets, OEM cartridges can be replaced with Nazdar 130 Series cartridges as they run out, rather than all colors at the initial install. This saves both time and money as there is no need to perform wasteful ink fill procedures or dispose of unused ink.
- Ink Performance
Outdoor Durability
Nazdar® 130 Series Inks are designed for maximum outdoor resistance to color fade and chemical attack caused by the combined effects of UV degradation and environmental pollution. Each color is formulated with durable long-term outdoor pigments. When Nazdar® 130 Series Inks are used with proper color management, color variance of the original print density will be minimal over a period of 24 months for vertical outdoor exposure. To ensure the color properties of Nazdar® 130 Series inks do not change during outdoor exposure, it is important to use proven substrates (flexible vinyl and pressure sensitive vinyl) that do not “yellow” or vary from their original white cast when exposed outdoors. All Nazdar® 130 Series Inks are formulated for maximum adhesion to an extensive range of unsupported and pressuresensitive vinyl. Always pretest for acceptable adhesion prior to production.
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Substrates
- Self-Adhesive, flexible and pressure
- sensitive vinyl.
- Banner Material
- Blue back paper
- Backed mesh
- Ink Changeover
When changing from Mimaki SS21 original ink cartridges or Nazdar 133 Series to Nazdar 130 series cartridges operators should remove the empty cartridge and replace with a Nazdar 130 Series ink cartridge and continue printing. This can be carried out either one color at a time or all colors together. No ink fills are required.
- Clean Up
Use item number LWS130FF Flush Solution for the most effective cleanup of ink spills and cleaning of jet assemblies. Avoid contact with skin. Wear approved safety glasses and appropriate gloves when using Maintenance Solution.
- Validated Equipment
Nazdar® 130 Series Inks are designed for use in the following printer platforms:
- Cartridges compatible with Mimaki JV33, CJV, JV300 and JV150 printers using Mimaki SS21 inks.
- Can be installed directly over Nazdar 133 series without the need to flush or custom profile.
Properties
- Color
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Environmental Operating Parameters
Temperature 66°F - 80°F [19˚C - 27˚C]
Optimum Humidity
40% - 60% (non-condensing)
Operational Humidity
30% - 70% (noncondensing)
Safety & Health
- Ink Handling
All personnel mixing and handling these products must wear gloves and eye protection. Clean up all spills immediately. If ink does come in contact with skin, wipe ink off with a clean, dry cloth (do not use solvent or flush solution). Wash the affected area with soap and water. Consult the Nazdar® 130 Series Material Safety Data Sheet for further instructions and warnings.
Packaging & Availability
- Packaging Type
- Manufacturers Product Offering
All colors listed below are available in 440ml cartridges, 1 liter bottles, 1 liter bags* and 2 liter MBIS compatible bags**. Flushing solution is available in 220ml cartridges and 1 liter
containers.
Nazdar 130 Series inks are available in CMYK LC LM and can be used in conjunction with Mimaki SS21 Orange, Light Black, Metallic and White.
* Compatible with Nite NAPIS-II systems.
** Compatible with MBIS 2 and 3 systems.
Storage & Handling
- Storage and Shelf Life
Storage and transportation of ink and cleaning solutions should be carried out between 5˚- 25˚C (41˚- 77˚F). Ink and cleaning solutions should always be kept away from heat, sparks, and flames. If stored or transported at a different temperature, the ink should be allowed to reach room temperature before calibration or printing. This may have an adverse effect on performance and will affect any warranties given by Nazdar®. Recommended shelf life of this product is 15 months from the date of manufacture when stored under preferred conditions.